[sane-devel] More on FreeBSD 4.7 RELEASE, libusb-0.1.6a, Canon N650U...

[Gerhard Jaeger]

Hi,

what about running the stuff as root?
Check the access rights!

Gerhard

On Donnerstag, 21. November 2002 15:27, Ryan Budge wrote:
> Hi all.
>
> Well im fighting it out still.
>
> 1.=09I recompiled my kernel and took out the uscanner driver.
>
> 2.=09On boot I get the scanner found by ugen0
>
>
> 3.=09Changed plustek.conf to contain :
> [usb] 0x04a9 0x2206
> device libusb:001:002
>
> 4.=09usbdevs -v gives :
> Controller /dev/usb0:
> addr 1: self powered, config 1, OHCI root hub(0x0000), OPTi(0x0000), re=
v
> 1.00
>  port 1 addr 2: power 500 mA, config 1, CANOSCAN N656U(0x2206),
> Canon(0x04a9), rev 1.00
>  port 2 powered
>
> 5.=09scanimage -L gives :
>
> [sanei_debug] Setting debug level of plustek to 255.
> [plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9
> [plustek] >#[usb] 0x04A9 0x2206<
> [plustek] >#device /dev/uscanner0<
> [plustek] >#[usb] 0x04A9 0x2206<
> [plustek] >[usb] 0x04a9 0x2206<
> [plustek] next device is a USB device (0x04A9-0x2206)
> [plustek] next device is an USB device
> [plustek] >device libusb:001:002<
> [plustek] Decoding device name >libusb:001:002<
> [plustek] ><
> [plustek] attach (libusb:001:002, 0xbfbfee38, 0x0)
> [plustek] Device configuration:
> [plustek] device name  : >libusb:001:002<
> [plustek] porttype     : 1
> [plustek] USB-ID       : >0x04A9-0x2206<
> [plustek] warmup       : -1s
> [plustek] lampOff      : -1
> [plustek] lampOffOnEnd : -1
> [plustek] skipCalibr.  : 0
> [plustek] invertNegs.  : 0
> [plustek] pos_x        : 0
> [plustek] pos_y        : 0
> [plustek] pos_shading_y: -1
> [plustek] neg_x        : 0
> [plustek] neg_y        : 0
> [plustek] neg_shading_y: -1
> [plustek] tpa_x        : 0
> [plustek] tpa_y        : 0
> [plustek] tpa_shading_y: -1
> [plustek] red gain     : -1
> [plustek] green gain   : -1
> [plustek] blue gain    : -1
> [plustek] red Gamma    : 1.00
> [plustek] green Gamma  : 1.00
> [plustek] blue Gamma   : 1.00
> [plustek] gray Gamma   : 1.00
> [plustek] ---------------------
> [plustek] drvopen()
> [plustek] usbDev_open(libusb:001:002,0x04A9-0x2206)
> [plustek] open failed: -1
> [plustek] sane_get_devices (0xbfbff744, 0)
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> [plustek] sane_exit
>
>
> Anyone have any more ideas ?
>
> Thanks for the help.
>
> Regards,
> Ryan Budge
> e-mail : ryan@smarthand.co.za
> Mobile : +27 83 415 7926
> Fax : +27 8 83 415 7926