[sane-devel] Umax Astra 2200(U? SU?)

[kw426 at earthlink.net]

this is what i suspected, and i do have the model with both usb and scsi, 
but so far no luck in getting it to work. i think i am having a problem 
with the kernel modules. it is the smp kernel from redhat 7.2 (2.4.7).
here is what i get in /var/log/messages when i plug the scanner in:

Oct 30 19:47:03 sphere kernel: hub.c: USB new device connect on bus1/1, 
assigned device number 2
Oct 30 19:47:03 sphere kernel: usb.c: USB device 2 (vend/prod 
0x1606/0x230) is not claimed by any active driver.
Oct 30 19:47:04 sphere kernel: usb.c: registered new driver usbscanner
Oct 30 19:47:04 sphere kernel: scanner.c: USB Scanner support registered.

now after reading thru this list archives i think i should see a lot more 
info on the scanner, but i get nothing. and of corse when i try scanimage 
-L i get the no scanners found error. perhaps someone could point me in 
the right direction?
thanks
wade

 On 
Thu, 31 Oct 2002, Oliver Rauch wrote:

> The Astra 2200SU is a scanner with scsi and usb interface.
> This one is supported.
> 
> The Astra 2200U is a scanner with only an usb interface,
> this one is not supported.
> 
> Bye
> Oliver
> 
> kw426 at earthlink.net schrieb:
> > 
> > http://panda.mostang.com/sane/sane-mfgs.html shows 3 entries for the astra
> > 2200, SU, both scsi and usb are listed as supported while the U is listed
> > as unsupported. does anyone know what the SU and U mean? my astra is
> > labeled just 2200 and im not sure if its supported or not.
> > thanks
> > wade richardson
> > 
> > _______________________________________________
> > Sane-devel mailing list
> > Sane-devel at www.mostang.com
> > http://www.mostang.com/mailman/listinfo/sane-devel
> 
>