[sane-devel] HP scanjet 3570c (USB)

[Peter Kirchgessner]

Hi Memala,

the HP Scanjet 3570c is not supported by the hp-backend and I assume not 
supported by SANE at all.
The hpscan-device mentioned in the sane-hp manpage (/dev/hpscan) is only 
used for the old HP ScanJet Plus. So the configuration with connect-usb 
would be the right choice, if it would be supported.

Sincerely

Peter Kirchgessner

memala at gmx.net schrieb:
> Hi mailinglist,
>   
> I'm using a "HP Scanjet 3570c". It is connected with usb.
> I use it at a Suse 8.1 Linux 2.4.18 .
> My current sane version is "sane 1.0.7-59".
> According the sane homepage my scanner is not supported.
> Anyway I wanted to give it a try.
> Searching in Google didn't helped much.
> The manpage "sane-hp" gives the hint to use the "hpscan" module.
> After some configuration of the "/etc/sane.d/hp.conf" and
> "/etc/sane.d/dll.conf" files I can't get the scanner to work.
> The command "scanimage -L" can't find any scanner.
> 
> $: scanimage -L
> 
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> 
> 
> 
> 
> Has anybody expirience with "sane" and "Hp scanjet 3570c" ?
> If yes can you give me some hints (thanks).
> 
> I got another question do I have to use the "hpscan" module or the 
> "libusb" module?
> 
> 
> Thanks and regards
> memala
> 


-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net