[sane-devel] usb scanner still not found

[Jaeger, Gerhard]

Hi,

this all looks okay, the problem is either your dll.conf
and/or the plustek.conf file...
At least you need the entry plustek in the dll.conf
and in the plustek.conf:
[usb] 0x004a9 0x2206
device auto
Check the examples in the file, that has been delivered with
the TEST3 tar-ball. Itmight happen, that the older ones are not
overwritten during the installation step...
This should do the trick!
  Gerhard

On Saturday, 30. November 2002 00:14, adam wrote:
> after  installing latest sane-backends, along with the 45test3 patch
>
>
> i am still receiving this message -
>
> [root at alakard rpms]# sane-find-scanner
>
>   # No SCSI scanners found. If you expected something different, make
> sure that
>   # you have loaded a SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04a9 [Canon], product=0x2206 [CanoScan]) at
> libusb:001:002
>   # A USB device was detected. This program can't be sure if it's really
>   # a scanner. If it is your scanner, it may or may not be supported by
>   # SANE. Try scanimage -L and read the backend's manpage.
>
>   # Scanners connected to the parallel port or other proprietary ports
> can't be
>   # detected by this program.
>
> its like it guess it sees it, but it isnt really sure :O
>
> -adam
>