[sane-devel] 44-10 vs epson 1250

[Till Kamppeter]

Epson Perfection 2450 works also without any problems.

    Till


Till Kamppeter wrote:
> When I have only an Epson Perfection 1260 connected ("plustek" driver) 
> the "snapscan" backend takes around 15 seconds, with "snapscan" 
> commented out xsnae needs less than 10 seconds to start, with "snapscan" 
> around 25. "mustek-usb" is on the second place with something like two 
> seconds.
> 
> I have also installed the Mandrake packages of HPOJ (with "rpm -Uvh 
> --nodeps" because the Mandrake package of SANE is not installed). The 
> "hpoj" scanner backend runs under SANE 1.0.9 without problems. There are 
> also no delays on xsane startup when the HP PSC 950 is turned off or 
> when the ptal-mlcd daemon is not running. So all works as expected. With 
> both devices (Epson Perfection 1260 and HP PSC 950) connected I get, as 
> expected, a menu to choose the device to use.
> 
> My System: Asus S8600 notebook with Intel PIII 850 MHz, 192 MB RAM, 
> Mandrake 9.0, kernel 2.4.19-16mdk, usb-uhci, HPOJ 0.9, libusb 0.1.6a.
> 
>    Till
> 
> 
> Henning Meier-Geinitz wrote:
> 
>> Hi,
>>
>> On Thu, Oct 17, 2002 at 11:09:06PM -0400, Gene Heskett wrote:
>>
>>> Then having had to go into the icons preferences and find the new 
>>> xsane and set that, I fired it off.  Past the root warning and it 
>>> then says "scanning for devices" and hangs seemingly forever as I 
>>> eventualy had to kill it with kpm. I just started it again after 
>>> doing a sane-frontends-1.0.8  make install, and its been hung now for 
>>> about 2 minutes.  But a ctrl-alt-esc plus a click on it kills it.
>>
>>
>>
>> Running xsane from an xterm like this:
>>
>> SANE_DEBUG_DLL=255 xsane
>>
>> should print the backend that takes that long. Tell us, which one it
>> is and comment it out in dll.conf (if it's not plustek itsself).
>>
>> Bye,
>>   Henning
>> _______________________________________________
>> Sane-devel mailing list
>> Sane-devel@www.mostang.com
>> http://www.mostang.com/mailman/listinfo/sane-devel
>>
>>
> 
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
> 
>