[sane-devel] The Epson 1660 setup on SuSE 8.1 ... hope it might be helpful for others:-)

[khk at khk.net]

The last steps (modprobe scanner) is no longer necessary once you have
the entry for the scanner in usb.distmap. From there on, the module
will be automatically loaded when the scanner is switched on.

Karl Heinz

> Dear fellows,
>
> These were the steps which finally made my Epson work with SuSE 8.1 and,
> even more important, continue working after a reboot:-)
>
> - Include 'options scanner product=0x11e vendor=0x4b8'
>   in /etc/modules.conf
> - Uncomment 'epson' (only epson) in
>   /etc/sane.d/dll.conf
> - Include 'usb /dev/usb/scanner0' in
>   /etc/sane.d/epson.conf;
>   NOTE: usb /dev/usbscanner did NOT work;
> - Include 'usb-ohci' in INITRD_MODULES
>   in /etc/sysconfig/kernel; and run mk_initrd
>   NOTE: including also 'scanner' did NOT help
> - Add an entry to the hotplug configuration
>   file /etc/hotplug/usb.distmap;
>   (i.e. copy a line -which indeed stretches over
>   three lines- and change the values to 0x11e
>   and 0x4b8 - according to first point)
> - Add 'modprobe scanner' in /etc/init.d/boot.local
>
> Cheers .... Wolfi
> =============================================
> mailto:wolfi_z at gmx.net
>
> Linux ... the better OS!
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel