[sane-devel] AGFA Spanscan E50 USB

Bob Lockie bjlockie at lockie.ca
Wed Oct 16 16:24:45 BST 2002


I'm trying to get an AGFA Spanscan E50 USB scanner to work.
It didn't right out of the box so I have some learning to do.

What is the generic USB driver that is mentioned?
I configured USB scanner support into the kernel, it works as a module.
I am using the CVS version of SANE and the 20020926 snapscan backend 
(which version is in CVS SANE?).
Hopefully someone can interpret this for me.
The first cat is after I booted.
The scanner is recognized but there is no driver has claimed that 
interface (the usbscanner as mentioned in the docs at 
http://snapscan.sourceforge.net/).
usbscanner is supposed to be mentioned.

cat /proc/bus/usb/devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB OHCI Root Hub
S:  SerialNumber=d8814000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
P:  Vendor=06bd ProdID=208f Rev= 1.00
S:  Manufacturer=AGFA
S:  Product=SNAPSCAN
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=16ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB OHCI Root Hub
S:  SerialNumber=d8812000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05a9 ProdID=a511 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS= 129 Ivl=1ms
I:  If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS= 257 Ivl=1ms
I:  If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS= 385 Ivl=1ms
I:  If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS= 513 Ivl=1ms
I:  If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS= 769 Ivl=1ms
I:  If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=01(Isoc) MxPS= 961 Ivl=1ms

lsusb
Unknown line at line 1809
Duplicate HUT Usage Spec at line 2650
Bus 002 Device 001: ID 0000:0000 Virtual Hub
Bus 002 Device 002: ID 06bd:208f AGFA-Gevaert NV SnapScan e50
Bus 001 Device 001: ID 0000:0000 Virtual Hub
Bus 001 Device 004: ID 05a9:a511 OmniVision Technologies, Inc. OV511+ WebCam

Why is there no manufacturer and product string for my webcam?


# modprobe  scanner vendor=0x06bd product=0x208f
# sane-find-scanner -v

checking /dev/usb/scanner0... open ok, vendor and product ids were identified

found USB scanner (vendor=0x06bd, product=0x208f) at /dev/usb/scanner0


Why do I have to provide the vendor and product to modprobe, I don't for my webcam?


----------------------------------------
>From Mozilla and GNU/Linux





More information about the sane-devel mailing list