[sane-devel] PRIMAX Jewle 4800

Michael Höller MichaelHoeller at t-online.de
Thu Oct 17 21:48:37 BST 2002


Hi,

I try to get a PRIMAX Jewle 4800 up t work but there seems to be a problem.
Can anyone tell me what I can do to get it to work?

Thanks a lot 
Michael



tamboti:~ # sgcheck

Assignment of generic SCSI devices,
device host/channel/ID/LUN type(numeric type) vendor model:

/dev/sg0 0/0/0/0 Direct-Access IBM DCAS-34330
/dev/sg1 0/0/1/0 Direct-Access IBM DPES-31080
/dev/sg2 0/0/3/0 Scanner Primax Jewel
/dev/sg3 1/0/0/0 CD-ROM LG CD-ROM CRD-8320B
/dev/sg4 1/0/1/0 CD-ROM HP CD-Writer+ 8200
tamboti:~ #

tamboti:~ # sane-find-scanner
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus and some scanners that are connected to the Universal
# Serial Bus (USB) depending on your OS. It will even find scanners
# that are not supported at all by SANE. It won't find a scanner that
# is connected to a parallel or proprietary port.

sane-find-scanner: found SCSI scanner "Primax Jewel 1.01" at device 
/dev/scanner
sane-find-scanner: found SCSI scanner "Primax Jewel 1.01" at device /dev/sg2


tamboti:~ # scanimage -d teco1:/dev/scanner
scanimage: open of device teco1:/dev/scanner failed: Invalid argument
tamboti:~ # scanimage --list-devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
tamboti:~#




More information about the sane-devel mailing list