[sane-devel] 44-10 vs epson 1250

Gene Heskett gene_heskett at iolinc.net
Fri Oct 18 04:09:06 BST 2002


Hi Gerhard;

I installed RH8.0 yesterday, then  had to go get the whole maryann 
of kde-3.0.4 for it cause I couldn't even get evolution to send a 
flippin email.  BlueCurve/Psyche is a P.O.C.

And as usual the redhat installer installed its version of 1.0.8 
anyway, meaning I had to do an rpm -e --nodeps `rpm -qa |grep sane`
also.  This due to your configure script telling me it was installed 
in /usr, and I knew better, or so I thought.  But after all that, 
it worked, using an older 43.5 version of plustek.  I also tested 
it at that time and both it and the gt-7200 epson backend both 
worked.

So I just blew my sane-backends-1.0.8 directory away, unpacked a 
fresh copy, cd'd to it, and unpacked the 
plustek-sane-0_44_10.tar.gz into there.  I didn't check anything, 
but ran configure as is and make, make install.

Then having had to go into the icons preferences and find the new 
xsane and set that, I fired it off.  Past the root warning and it 
then says "scanning for devices" and hangs seemingly forever as I 
eventualy had to kill it with kpm. I just started it again after 
doing a sane-frontends-1.0.8  make install, and its been hung now 
for about 2 minutes.  But a ctrl-alt-esc plus a click on it kills 
it.

Scanning the system, it appears that all the defines are correct in 
linux/drivers/usb/scanner.h, and a system scan of the usb hardware 
does eventually find it, but takes most of a minute to show the 
display which then includes the scanner.  On the second run, the 
first one apparently timed out.

/usr/local/etc/sane.d/plustek.conf still carries the old date, as 
does epson.conf in the same directory.  Due to compiler missmatches 
since 3.2 is now stock, the first thing I did after the 8.0 install 
yesterday was recompile the kernel, same old config.

A uname -a gives:
Linux coyote.coyote.den 2.4.20-pre10-ac1 #3 Wed Oct 16 14:00:01 EDT 
2002 i686 athlon i386 GNU/Linux

What did I do wrong?  Sniff, I want my scanner back!

-- 
Cheers, Gene
AMD K6-III at 500mhz 320M
Athlon1600XP at 1400mhz  512M
99.18% setiathome rank, not too shabby for a WV hillbilly



More information about the sane-devel mailing list