[sane-devel] Scanner ARTEC e+

[antoine]

> Is this the successor of the Artec E+ 48U, with an optical resolution of
> 1200x2400 dpi, vid 0x05d8 pid 0x4004 ?
YES !
>modify the file
> tevion9693usb.conf .
I dowloaded the file "tevion9693usb-0.0.10.tar.gz"
> Change the line
> usb 0x05d8 0x4003
> to
> usb 0x05d8 0x4004
> and edit the path to your firmware file (probably called "1200.usb" ?)
In the  tevion9693usb.conf ?
> Make sure, that the scanner module is loaded:
> modprobe -r scanner
> modprobe scanner vendor=0x05d8 product=0x4004
>------------------------------
> Try to start a frontend.
> If your scanner is detected and the frontend starts up, be /*VERY CAREFUL*/
> when you try to start a scan. Keep one hand at the usb cable and pull the
> plug immediately, if the scanner starts to make strange noise.
> Even if this works somehow, the result will be quite crappy, but this could
> be fixed.
is it really dangerous and can break  the scanner ?

thanks !

antoine Waché