[sane-devel] Installation of Epson 1650 Scanner
Karl Heinz Kremer
khk at khk.net
Sun Oct 27 01:19:17 GMT 2002
Sorry for the misunderstanding. The backend tries to send two bytes
(the reset command), but never receives the acknowledgement from
the scanner. You wrote in your first message that the permissions
on the device file are 666, can you please verify this.
Do you see any messages on the console?
Is the scanner connected via a hub? If so, can you try to connect
it directly to the computer and run the test again.
Do you have a second USB cable that you can use? I have seen this
problem once where replacing the cable fixed everything.
Do you have any other USB devices connected to your computer?
Karl Heinz
On Sat, Oct 26, 2002 at 09:10:30PM -0400, John S. Dey wrote:
> By home I meant that things are not working yet. Please note that the
> device opens and the debug output ends with "Send buf, Size=2" I
> rechecked the file epson.conf for the correct spelling for the device
> name and it appears correct. Where do I go from here.
>
>
> Karl Heinz Kremer wrote:
>
> >This is strange. I assume that you have not yet changed the
> >spelling of the entry in the config file. Therefore the scanner
> >should not react at all. Or did I misinterpret your comment
> >about not being home?
> >
> >Karl Heinz
> >
> >On Sat, Oct 26, 2002 at 04:18:42PM -0400, John S. Dey wrote:
> >
> >
> >>Karl:
> >>
> >>Thanks for correcting my spelling. I'm not home yet however. When I
> >>xsane, a window pops up and first says that it is "scanning for a
> >>device" . After about 15 sec. the light on the scanner is blinking and
> >>then the window goes blank and the light on the scanner stops blinking
> >>and stays on. The debug file indicates the device has been openned and
> >>a line "Send buf, Size=2" is added to file. I couldn't delete the
> >>window and I couldn't kill it as user or super user. Logout/login got
> >>rid of the xsane process. Have I experienced normal behavior or is
> >>there still something I am missing. Thanks for your assistance.
> >>
> >>
> >>Karl Heinz Kremer wrote:
> >>
> >>
> >>
> >>>The log files show that you are trying to open the file
> >>>/dev/ubs/scanner0 and not /dev/usb/scanner0. I am pretty
> >>>sure that the scanner will work once you correct the typo.
> >>>
> >>>Karl Heinz
> >>>
> >>>On Sat, Oct 26, 2002 at 02:16:53PM -0400, John S. Dey wrote:
> >>>
> >>>
> >>>
> >>>
> >>>>Hello:
> >>>>
> >>>>I am trying to connect my Epson Perfection 1650 to a Up2date RH7.3
> >>>>linux machine. I researched the archives and ran the follow test. The
> >>>>scanner is on and connected.
> >>>>The device, /dev/usb/scanner0, privelages was set to 666. Can anyone
> >>>>help me out with the installation?
> >>>>Thanks
> >>>>
> >>>>TESTS
> >>>>
> >>>>"sane-find-scanner" produces:
> >>>>
> >>>>sane-find-scanner: found USB scanner (vendor = 0x04b8, product =
> >>>>0x0110) at device /dev/usb/scanner0
> >>>>
> >>>>"export SANE_DEBUG_EPSON=3D12
> >>>>xsane > /tmp/scan.log 2>&1" produces the output:
> >>>>
> >>>>[sanei_debug] Setting debug level of epson to 3.
> >>>>[epson] sane_init: sane-backends 1.0.7
> >>>>[epson] SANE Epson Backend v0.2.19 - 2002-01-18
> >>>>[epson] attach: opening epson:/dev/ubs/scanner0
> >>>>[epson] attach: open failed: Invalid argument
> >>>>
> >>>>I have set epson.conf to both /dev/ubs/scnner0 (output not shown) and
> >>>>epson:/dev/ubs/scanner0
> >>>>
> >>>>I issued:
> >>>>"SANE_DEBUG_EPSON=255 scanimage -L" which produces:
> >>>>[sanei_debug] Setting debug level of epson to 255.
> >>>>.
> >>>>.
> >>>>.
> >>>>[epson] sane_init, ># recognized.<
> >>>>[epson] sane_init, >epson:/dev/ubs/scanner0<
> >>>>[epson] sane_init, >epson:/dev/ubs/scanner0<
> >>>>[epson] attach(epson:/dev/ubs/scanner0)
> >>>>[epson] SANE Epson Backend v0.2.19 - 2002-01-18
> >>>>[epson] attach(epson:/dev/ubs/scanner0)
> >>>>[epson] attach: opening epson:/dev/ubs/scanner0
> >>>>[epson] attach: open failed: Invalid argument
> >>>>[epson] sane_get_devices()
> >>>>.
> >>>>.
> >>>>.
> >>>>and finally I issued:
> >>>>"SANE_DEBUG_DLL=255 scanimage -L" which produces:
> >>>>
> >>>>[sanei_debug] Setting debug level of dll to 255.
> >>>>[dll] sane_init: SANE dll backend version 1.0.5 from sane-backends-1.0.7
> >>>>[dll] add_backend: adding backend epson
> >>>>[dll] load: loading backend epson
> >>>>[dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1'
> >>>>[dll] init: initializing backend `epson'
> >>>>[sanei_debug] Setting debug level of epson to 3.
> >>>>[epson] sane_init: sane-backends 1.0.7
> >>>>[epson] SANE Epson Backend v0.2.19 - 2002-01-18
> >>>>[epson] attach: opening epson:/dev/ubs/scanner0
> >>>>[epson] attach: open failed: Invalid argument
> >>>>[dll] init: backend `epson' is version 1.0.219
> >>>>[dll] sane_exit: exiting
> >>>>[dll] sane_exit: calling backend `epson's exit function
> >>>>[dll] sane_exit: finished
> >>>>
> >>>>
> >>>>
> >>>>_______________________________________________
> >>>>Sane-devel mailing list
> >>>>Sane-devel at www.mostang.com
> >>>>http://www.mostang.com/mailman/listinfo/sane-devel
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>
> >>
> >>
> >
> >
> >
>
>
>
--
Karl Heinz Kremer khk at khk.net
PGP Key at http://www.khk.net/download/khk.asc
EPSON Sane Backend: http://www.khk.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20021026/c74c05ea/attachment.sig>
More information about the sane-devel
mailing list