[sane-devel] Umax Astra 1200S freezing up

[Oliver Rauch]

Alan & Lori Smith schrieb:
> 
> I have a Umax Astra 1200S that I am using with an Initio 9100A SCSI card
> under Mandrake 8.2.  I have no trouble seeing the scanner (using
> sane-find-scanner) and it is recognized properly by xscanimage.  The
> problem is that it locks up scanimage or xscanimage whenever I try to
> make a scan.  I have had the same results using the included Domex card
> as well.  I can scan properly in WinDoze with either card.  No other
> devices are on the SCSI bus and I have only a 3 foot cable.

> [umax] set_window_param
> [umax] window descriptor block created with 82 bytes
> [umax] check condition sense handler (scsi_fd = 7)
> [umax] check condition sense: ILLEGAL REQUEST
> [umax] -> no error (#0)
> [umax] -> invalid field in parameter list
> [umax] umax_set_window_param: command returned status Error during device I/O

As far as I remember this error is not caused by the driver.
I think it is a problem of your scsi cable (quality) or the termination
if your scsi bus.

Bye
Oliver

-- 
Homepage:	http://www.rauch-domain.de
sane-umax:	http://www.rauch-domain.de/sane-umax
xsane:		http://www.xsane.org
E-Mail:		mailto:Oliver.Rauch at rauch-domain.de