[sane-devel] New sane-umax backend version

[Oliver Rauch]

Hello.

I released the version 1.0.8 build 36 of the sane-umax backend.

The driver does support the PowerLook 2100XL now.
Please send me your experiences with the PowerLook 2100XL
and this driver.

NEWS:
  * added support for PowerLook 2100XL

  * changes for exposure times:
    - Inquiry does print correct maximum value now
    - changed variable type from SANE_FIXED to SANE_INT
    - exposure times setting for colormode does work correct now
    - as default there is only one common setting for exposure times in rgb mode,
      added umax.conf option exposure-time-rgb-bind to enable different settings
      for each color
    - added option select-calibration-exposure-time, disabled by default.
      if disabled then the calibration expousre times are the same as the scan exposure
times

  * added UMAX PS-2400X as supported device

  * added batch scanning support:
    Options:
    --batch-scan-start:         calibration, scan, scanhead is not moved into home
position
    --batch-scan-loop:          no calibration, scan, scanhead is not moved into home
position
    --batch-scan-end:           no calibration, scan, scanhead is moved into home position
    --batch-scan-next-y:        defines the y start position of the bext batch scan

Bye
Oliver

-- 
Homepage:	http://www.rauch-domain.de
sane-umax:	http://www.rauch-domain.de/sane-umax
xsane:		http://www.xsane.org
E-Mail:		mailto:Oliver.Rauch at rauch-domain.de