[sane-devel] Gradually increasing scan times
Karl O. Pinc
Mon, 14 Apr 2003 01:35:00 -0500
On 2003.04.12 15:47 Peter Kirchgessner wrote:
> Karl O. Pinc schrieb:
>> So, I've installed the sane-backend and sane-frontend 1.0.11 (rpm
>> release 1)
>> rpms uploaded by T. Ribbrock to Redhat's site. (I couldn't compile
>> without installing too many dependencies.) And recompiled and
>> installed the
>> xsane 0.90 (rpm release 1) rpm. (I couldn't install the binary
>> because of
>> dependencies.) And now what's happening is that the scanner device
>> never found. scanimage doesn't find the scanner either, but
>> does. Something overwrote my config file without telling me. The
>> /etc/sane.d/hp.conf file (after my messing with it) is:
>> scsi HP C2520A * * * * *
>> sane-find-scanner says:
>> [root@mofo root]# sane-find-scanner found SCSI processor "HP C2520A
>> 3644" at /dev/sg3
>> found SCSI processor "HP C2520A 3644" at /dev/sgd
>> /dev/sg3 has world read/write permissions.
> please have a look at /etc/sane.d/dll.conf. Make sure that the
> hp-backend is not commented out.
There's a line containing 'hp', (uncommented).
Free Software: "You don't pay back, you pay forward."
-- Robert A. Heinlein