[sane-devel] HP7400 on usb

[Rene Rebe]

Hi.

thanks for all the info. Currenly the paid work and my study are
keeping be busy. I'll have a close look during the weekend ...

On: Thu, 10 Apr 2003 20:37:55 +0200 (CEST),
    Ondrej Koala Vacha <koala at fi.muni.cz> wrote:
> On Tue, 8 Apr 2003, Henning Meier-Geinitz wrote:
> 
> > Is the scanner listed in /proc/bus/usb/devices? If not, something with
> > your kernel USB system is wrong (wrong driver?).
> 
> Yes, it's:
> 
> # cat /proc/bus/usb/devices
> ..
> P:  Vendor=03f0 ProdID=0801 Rev= 0.01
> S:  Manufacturer=hp
> S:  Product=hp scanjet 7400c
> S:  SerialNumber=SCN227S0199LZ   
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  2mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS=   8 Ivl=0ms
> E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
> ..
> 
> # mount
> ...
> none on /proc/bus/usb type usbdevfs (rw)
> 
> 
> > 
> > If yes, does sane-find-scanner find the scanner? 
> 
> No.
> 
> > If it's not found
> > even as root, you may not have libusb-0.1.6 or newer. When you build
> 
> I have installed libusb-0.1.7
> 
> > sane, configure prints a line like this "Libs=-lusb ...". If the -lusb
> 
> 
> Yes, I have LIBS='-lusb -lnsl -lm  -ljpeg' in my config.log
> 
> 
> regards

- René

--  
René Rebe - Europe/Germany/Berlin
e-mail:   rene at rocklinux.org, rene.rebe at gmx.net
web:      http://www.rocklinux.org/people/rene http://gsmp.tfh-berlin.de/rene/

Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.