[sane-devel] No devices found with mustek III ep plus

Donald Quaid dquaid at kittypuss.org
Thu Apr 10 23:01:12 BST 2003


Thank you, I think I am getting somewhere, so far
it sits, the light comes on, and it occasionally
makes a 'stepper sound', like one step of the motor,
but nothing else it pauses here.



[root at mew sane.d]# SANE_DEBUG_MUSTEK_PP=255 scanimage
[sanei_debug] Setting debug level of mustek_pp to 255.
[mustek_pp] sane-mustek_pp, version 0.12-alpha. build for SANE 1.0.11
[mustek_pp] backend by Jochen Eisinger <jochen.eisinger at gmx.net>
[mustek_pp] ccd300_init: found scanner on port ``0x378''
[mustek_pp] sane_attach: attaching device ``Mustek-III-EP+'' to port 0x378 
(driver ccd300 v0.11-devel by Jochen Eisinger)
[mustek_pp] ccd300_capabilities: 600 III EP Plus
[mustek_pp] sane_open: Using device ``Mustek-III-EP+'' (driver ccd300 
v0.11-devel by Jochen Eisinger)
[mustek_pp] ccd300_open: called for port 0x378
[mustek_pp] sane_get_parameters: can't set parameters while scanning
[mustek_pp] ccd300_start: starting scanner
P6
# SANE data follows
425 583
255








On Thursday 10 April 2003 03:08, edg1 at tiscali.be wrote:
> From: Donald Quaid <dquaid at kittypuss.org>
>
> >To: sane-devel at www.mostang.com
> >Subject: [sane-devel] No devices found with mustek III ep plus
> >Date: Thu, 10 Apr 2003 00:23:48 -0500
> >
> >
> >[root at mew ntr]# SANE_DEBUG_MUSTEK_PP=255 scanimage
> >[sanei_debug] Setting debug level of mustek_pp to 255.
> >[mustek_pp] sane-mustek_pp, version 0.12-alpha. build for SANE 1.0.11
> >[mustek_pp] backend by Jochen Eisinger <jochen.eisinger at gmx.net>
> >[mustek_pp] sane_init: parse error in line 13: unexpected  ``option''
> >
> > [...]
> >
> >/etc/sane.d/dll.conf has
> >mustek
> >mustek_pp
> >
> >both Un commented.
> >
> >sorry if I forgot anything else, I have been
> >smashing my keyboard in frustration over this.
>
> The parse errors occur when parsing the mustek_pp.conf file
> (probably also in /etc/sane.d, possibly in /usr/local/etc/sane.d).
>
> The format of the configuration file has changed between 1.0.9 and
> 1.0.10, so maybe you are using an old format. (Or you have a
> mustek_pp.conf file at both locations, and sane is picking up
> the wrong one).
>
> Your mustek_pp.conf file should only contain something
> like this (assuming it's a CCD scanner, not a CIS).
>
> scanner Mustek-III-EP+ 0x378 ccd300
>
> Regards,
>
> Eddy
>
>
> ---------------------------------
> U surft met een klassieke telefoonlijn?
> Bespaar tot 25% met Tiscali Complete !
> Speciaal aanbod : eerste abonnementsjaar gratis.
> ... Meer info op http://complete.tiscali.be
>
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel




More information about the sane-devel mailing list