[sane-devel] Gradually increasing scan times

[Karl O. Pinc]

On 2003.04.12 15:47 Peter Kirchgessner wrote:
> Hi,
> 
> 
> Karl O. Pinc schrieb:
> <snip>
>> 
>> So, I've installed the sane-backend and sane-frontend 1.0.11 (rpm 
>> release 1)
>> rpms uploaded by T. Ribbrock to Redhat's site.  (I couldn't compile 
>> them
>> without installing too many dependencies.)  And recompiled and 
>> installed the
>> xsane 0.90 (rpm release 1) rpm.  (I couldn't install the binary 
>> because of
>> dependencies.)  And now what's happening is that the scanner device 
>> is
>> never found.  scanimage doesn't find the scanner either, but 
>> sane-find-scanner
>> does.  Something overwrote my config file without telling me.  The 
>> new
>> /etc/sane.d/hp.conf file (after my messing with it) is:
>> 
>> /dev/sg3
>> scsi HP C2520A * * * * *
>> 
>> sane-find-scanner says:
>> [root at mofo root]# sane-find-scanner found SCSI processor "HP C2520A 
>> 3644" at /dev/sg3
>> found SCSI processor "HP C2520A 3644" at /dev/sgd
>> 
>> /dev/sg3 has world read/write permissions.
>> 
> <snip>
> 
> please have a look at /etc/sane.d/dll.conf. Make sure that the 
> hp-backend is not commented out.

There's a line containing 'hp', (uncommented).

Thanks.

Karl <kop at meme.com>
Free Software:  "You don't pay back, you pay forward."
                  -- Robert A. Heinlein