[sane-devel] HP 7450C ... Need new patch
Thomas Frayne
tomf@sjpc.org
04 Aug 2003 11:00:59 -0700
On Sun, 2003-07-27 at 13:05, Rene Rebe wrote:
> Coud you try the current version at:
>
> http://schillernet.dyndns.org/svn/sane-avision/
>
I downloaded the two files, did configure and make, ran xsane with ADF
setting, and clicked SCAN. The scanner hung initializing as it did
before I changed configuration files to get it to produce a black page.
After several minutes xsane produced an error message, and
Jul 29 22:31:27 localhost modprobe: modprobe: Can't locate module
char-major-81
Jul 29 22:31:27 localhost last message repeated 3 times
Jul 29 22:35:41 localhost kernel: scsi: device set offline - command
error recover failed: host 1 channel 0 id 0 lun 0
appeared in /var/log/messages.
I did a Redhat kernel upgrade since I last had the scanner (sort of)
working, so I might have destroyed some configuration data.
I am appending more of the log in case it might help.
If you can't spot what might be wrong from this much info, please let me
know what other data is needed.
Thanks.
Tom Frayne
---------------------------------------------------------------
Jul 29 16:53:52 localhost kernel: usb.c: USB device 2 (vend/prod
0x3f0/0x801) is not claimed by any active driver.
Jul 29 16:53:52 localhost kernel: hpusbscsi.c: [hpusbscsi_init:250]
driver loaded, DebugLvel=0
Jul 29 16:53:52 localhost kernel: usb.c: registered new driver hpusbscsi
Jul 29 16:53:52 localhost kernel: scsi1 : hpusbscsi
Jul 29 16:53:52 localhost kernel: hub.c: new USB device 00:0b.2-1.2,
assigned address 3
Jul 29 16:53:52 localhost kernel: usb.c: USB device 3 (vend/prod
0x2821/0x5001) is not claimed by any active driver.
Jul 29 16:53:52 localhost kernel: EXT2-fs warning: maximal mount count
reached, running e2fsck is recommended
Jul 29 16:53:52 localhost kernel: hub.c: new USB device 00:0b.2-1.4,
assigned address 4
Jul 29 16:53:52 localhost kernel: usb.c: USB device 4 (vend/prod
0x3f0/0x3404) is not claimed by any active driver.
Jul 29 16:53:52 localhost kernel: hdc: attached ide-scsi driver.
Jul 29 16:53:52 localhost kernel: scsi2 : SCSI host adapter emulation
for IDE ATAPI devices
Jul 29 16:53:52 localhost kernel: Vendor: HP Model: CD-Writer+
8100 Rev: 1.0g
Jul 29 16:53:52 localhost kernel: Type:
CD-ROM ANSI SCSI revision: 02
Jul 29 16:53:52 localhost kernel: resize_dma_pool: unknown device type
-1
Jul 29 16:53:52 localhost kernel: Vendor: hp Model: scanjet
7400c Rev: 0.8M
Jul 29 16:53:52 localhost kernel: Type:
Scanner ANSI SCSI revision: 02
Jul 29 16:53:52 localhost kernel: Initializing USB Mass Storage
driver...
Jul 29 16:53:52 localhost kernel: usb.c: registered new driver
usb-storage
Jul 29 16:53:52 localhost kernel: scsi3 : SCSI emulation for USB Mass
Storage devices
Jul 29 16:53:52 localhost kernel: Vendor: ASUS Model:
CRW-5224A Rev: 1.00
Jul 29 16:53:52 localhost kernel: Type:
CD-ROM ANSI SCSI revision: 02
Jul 29 16:53:52 localhost kernel: USB Mass Storage support registered.
Jul 29 16:53:53 localhost kernel: Attached scsi CD-ROM sr0 at scsi0,
channel 0, id 4, lun 0
Jul 29 16:53:53 localhost kernel: Attached scsi CD-ROM sr1 at scsi2,
channel 0, id 0, lun 0
Jul 29 16:53:53 localhost kernel: Attached scsi CD-ROM sr2 at scsi3,
channel 0, id 0, lun 0
Jul 29 16:53:53 localhost kernel: (scsi0:A:4): 10.000MB/s transfers
(10.000MHz, offset 32)
Jul 29 16:53:53 localhost kernel: sr0: scsi3-mmc drive: 0x/0x dvd-ram
cd/rw xa/form2 cdda tray
Jul 29 16:53:53 localhost kernel: Uniform CD-ROM driver Revision: 3.12
Jul 29 16:53:53 localhost kernel: sr1: scsi3-mmc drive: 24x/24x writer
cd/rw xa/form2 cdda tray
Jul 29 16:53:53 localhost kernel: usb.c: registered new driver usblp
Jul 29 16:53:53 localhost kernel: printer.c: usblp0: USB Bidirectional
printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3404
Jul 29 16:53:53 localhost kernel: printer.c: v0.11: USB Printer Device
Class driver
Jul 29 16:53:53 localhost kernel: sr2: scsi-1 drive
Jul 29 16:53:53 localhost kernel: Attached scsi generic sg5 at scsi1,
channel 0, id 0, lun 0, type 6
Jul 29 16:53:53 localhost kernel: parport0: PC-style at 0x378
[PCSPP,TRISTATE]
Jul 29 16:53:53 localhost kernel: ip_tables: (C) 2000-2002 Netfilter
core team
Jul 29 16:53:53 localhost kernel: ip_conntrack version 2.1 (6143
buckets, 49144 max) - 292 bytes per conntrack
Jul 29 16:53:53 localhost kernel: Linux Tulip driver version
0.9.15-pre12 (Aug 9, 2002)
Jul 29 16:53:53 localhost kernel: PCI: Found IRQ 11 for device 00:0c.0
Jul 29 16:53:53 localhost kernel: eth0: ADMtek Comet rev 17 at
0xf09a3000, 00:C0:49:B4:25:D7, IRQ 11.
Jul 29 16:53:53 localhost sshd: succeeded
Jul 29 16:53:55 localhost xinetd[2719]: xinetd Version 2.3.11 started
with libwrap loadavg options compiled in.
Jul 29 16:53:55 localhost xinetd[2719]: Started working: 1 available
service
Jul 29 16:53:57 localhost xinetd: xinetd startup succeeded
Jul 29 16:53:59 localhost ntpd: succeeded
Jul 29 16:53:59 localhost ntpd: succeeded
Jul 29 16:54:05 localhost ntpdate[2734]: step time server 66.187.233.4
offset -0.495394 sec
Jul 29 16:54:05 localhost ntpd: succeeded
Jul 29 16:54:05 localhost ntpd: ntpd startup succeeded
Jul 29 16:54:05 localhost ntpd[2738]: ntpd 4.1.1c-rc1@1.836 Thu Feb 13
12:17:19 EST 2003 (1)
Jul 29 16:54:05 localhost exportfs[2747]: No 'sync' or 'async' option
specified for export "FrayneLaptop:/usr/local". Assuming default
behaviour ('sync'). NOTE: this default has changed from previous
versions
Jul 29 16:54:05 localhost exportfs: exportfs: No 'sync' or 'async'
option specified for export "FrayneLaptop:/usr/local".
Jul 29 16:54:05 localhost exportfs: Assuming default behaviour
('sync').
Jul 29 16:54:05 localhost exportfs: NOTE: this default has changed
from previous versions
Jul 29 16:54:05 localhost exportfs[2747]: No 'sync' or 'async' option
specified for export "FrayneLaptop:/usr/local/tom/mydata". Assuming
default behaviour ('sync'). NOTE: this default has changed from
previous versions
Jul 29 16:54:05 localhost exportfs: exportfs: No 'sync' or 'async'
option specified for export "FrayneLaptop:/usr/local/tom/mydata".
Jul 29 16:54:05 localhost exportfs: Assuming default behaviour
('sync').
Jul 29 16:54:05 localhost exportfs: NOTE: this default has changed
from previous versions
Jul 29 16:54:05 localhost ntpd[2738]: precision = 15 usec
Jul 29 16:54:05 localhost ntpd[2738]: kernel time discipline status 0040
Jul 29 16:54:05 localhost ntpd[2738]: frequency initialized -50.198 from
/etc/ntp/drift
Jul 29 16:54:05 localhost kernel: Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
Jul 29 16:54:05 localhost nfs: Starting NFS services: succeeded
Jul 29 16:54:05 localhost nfs: rpc.rquotad startup succeeded
Jul 29 16:54:05 localhost nfs: rpc.nfsd startup succeeded
Jul 29 16:54:05 localhost nfs: rpc.mountd startup succeeded
Jul 29 16:54:06 localhost Win4Lin: Starting Win4Lin:
Jul 29 16:54:10 localhost kernel: win4lin: mki_version 5, num_cpus 1,
pae 0
Jul 29 16:54:10 localhost kernel: win4Lin: preempt_enable 0x00000000
Jul 29 16:54:10 localhost Win4Lin: succeeded
Jul 29 16:54:10 localhost Win4Lin: ^[[60G
Jul 29 16:54:11 localhost Win4Lin:
Jul 29 16:54:11 localhost rc: Starting Win4Lin: succeeded
Jul 29 16:54:11 localhost sendmail: sendmail startup succeeded
Jul 29 16:54:11 localhost sendmail: sm-client startup succeeded
Jul 29 16:54:12 localhost gpm: gpm startup succeeded
Jul 29 16:54:12 localhost rc: Starting edge: succeeded
Jul 29 16:54:13 localhost canna: succeeded
Jul 29 16:54:13 localhost crond: crond startup succeeded
Jul 29 16:54:15 localhost kernel: parport0: PC-style at 0x378
[PCSPP,TRISTATE]
Jul 29 16:54:15 localhost kernel: lp0: using parport0 (polling).
Jul 29 16:54:15 localhost kernel: lp0: console ready
Jul 29 16:54:15 localhost modprobe: modprobe: Can't locate module
char-major-188
Jul 29 16:54:15 localhost last message repeated 15 times
Jul 29 16:54:16 localhost cups: cupsd startup succeeded
Jul 29 16:54:16 localhost xfs: xfs startup succeeded
Jul 29 16:54:16 localhost anacron: anacron startup succeeded
Jul 29 16:54:16 localhost atd: atd startup succeeded
Jul 29 16:54:17 localhost rhnsd: rhnsd startup succeeded
Jul 29 16:54:17 localhost rhnsd[3612]: Red Hat Network Services Daemon
starting up.
Jul 29 16:54:17 localhost xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/cyrillic (unreadable)
Jul 29 16:57:26 localhost ntpd[2738]: kernel time discipline status
change 41
Jul 29 16:59:34 localhost ntpd[2738]: kernel time discipline status
change 1
Jul 29 17:35:53 localhost gdm(pam_unix)[3667]: session opened for user
tom by (uid=0)
Jul 29 17:35:54 localhost gdm[3667]: gdm_auth_user_add: /home/tom is
writable by group.
Jul 29 17:35:55 localhost gconfd (tom-3992): starting (version 2.2.0),
pid 3992 user 'tom'
Jul 29 17:35:55 localhost gconfd (tom-3992): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config
source at position 0
Jul 29 17:35:55 localhost gconfd (tom-3992): Resolved address
"xml:readwrite:/home/tom/.gconf" to a writable config source at position
1
Jul 29 17:35:55 localhost gconfd (tom-3992): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config
source at position 2
Jul 29 17:36:15 localhost kernel: Creative EMU10K1 PCI Audio Driver,
version 0.20, 17:28:21 Jul 15 2003
Jul 29 17:36:15 localhost kernel: PCI: Found IRQ 10 for device 00:0d.0
Jul 29 17:36:15 localhost kernel: PCI: Sharing IRQ 10 with 00:07.2
Jul 29 17:36:15 localhost kernel: PCI: Sharing IRQ 10 with 00:0b.2
Jul 29 17:36:15 localhost kernel: emu10k1: EMU10K1 rev 8 model 0x8027
found, IO at 0x9c00-0x9c1f, IRQ 10
Jul 29 17:36:15 localhost kernel: ac97_codec: AC97 codec, id: TRA35
(TriTech TR A5)
Jul 29 17:36:15 localhost modprobe: modprobe: Can't locate module
sound-service-0-3
Jul 29 17:37:31 localhost su(pam_unix)[4133]: session opened for user
root by tom(uid=500)
Jul 29 17:37:38 localhost gconfd (root-4179): starting (version 2.2.0),
pid 4179 user 'root'
Jul 29 17:37:38 localhost gconfd (root-4179): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config
source at position 0
Jul 29 17:37:38 localhost gconfd (root-4179): Resolved address
"xml:readwrite:/root/.gconf" to a writable config source at position 1
Jul 29 17:37:38 localhost gconfd (root-4179): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config
source at position 2
Jul 29 22:31:27 localhost modprobe: modprobe: Can't locate module
char-major-81
Jul 29 22:31:27 localhost last message repeated 3 times
Jul 29 22:35:41 localhost kernel: scsi: device set offline - command
error recover failed: host 1 channel 0 id 0 lun 0