[sane-devel] Information about new EPSON Scanner "Perfection 1670"
Gerhard Jaeger
gerhard@gjaeger.de
Wed, 13 Aug 2003 08:02:31 +0200
Quite funny,
I already got one request this morning from a guy in Australia who ordere=
d
the 1660 and got the 1670...
If it's similar (by means of the chipset) to the 1260, then it should be =
no
big deal to support this scanner with the plustek backend...
Ciao
Gerhard
On Mittwoch, 13. August 2003 02:45, Karl Heinz Kremer wrote:
> The new EPSON Perfection 1670 is not and will not be supported by the
> EPSON backend.
> It's design seems to be similar to the Perfection 1260, which is
> supported by the Plustek
> backend. I have not seen this new scanner, so I don't know if it really
> falls into the same
> category as the Perfection 1670.
>
> The /proc/bus/usb/devices output looks similar (at least it has an
> interrupt endpoint):
>
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D256ms
> T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D05 Cnt=3D01 Dev#=3D 2 Spd=3D480=
MxCh=3D 0
> D: Ver=3D 2.00 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff MxPS=3D64 #Cfgs=3D =
1
> P: Vendor=3D04b8 ProdID=3D011f Rev=3D 1.07
> S: Manufacturer=3DEPSON
> S: Product=3DEPSON Scanner
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3Dc0 MxPwr=3D100mA
> I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driv=
er=3Dusbscanner
> E: Ad=3D81(I) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms
> E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 512 Ivl=3D0ms
> E: Ad=3D83(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D4096ms
>
> I already know of one unlucky customer who thought because the model
> number
> was similar than the 1660, it would work the same way.
>
> Karl Heinz
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel