[sane-devel] Epson CX5200 not detected with sane-find-scanner

[Jeff Courtade]

Henning Meier-Geinitz wrote:

>Hi,
>
>On Tue, Aug 05, 2003 at 02:40:22PM -0400, Jeff Courtade wrote:
>  
>
>>When running this with the official distribution there was no additional 
>>output from scanimage -L
>>with
>>export SANE_DEBUG_EPSON=255  set.
>>    
>>
>
>This means the epson backend was not loaded. That doesn't happen with
>the standard SANE distribution, so either your dustribution or you
>changed something :-)
>  
>
I built them from sources, I did nothing unusual .... funny ...
I searched for other peope with this issue and found nothing so I 
figured it was something strange to do with me..

Again this is nothing unusual :)

>  
>
>>I installed the available dev snapshot just now.
>>
>>After setting up /etc/sane.d/epson.conf
>>
>>usb /dev/usb/scanner0
>>
>>now when I set the debug level I get additional output
>>
>>and it detects my scanner
>>
>>This is the output from that
>>
>>Should it be detected as an unknown model?
>>    
>>
>
>I don't know. Does scanning work?
>
>E.g. "scanimage >image.pnm"? scanimage --help for more options.
>  
>

Hehe I only got a black and white one so far Just ran a color one and I 
am transferring the file now to look at it.

SANE is just cool.

Thanx

Jeff

>Bye,
>  Henning
>_______________________________________________
>Sane-devel mailing list
>Sane-devel at www.mostang.com
>http://www.mostang.com/mailman/listinfo/sane-devel
>  
>