[sane-devel] Epson CX5200 not detected with sane-find-scanner

Jeff Courtade jeff at courtade.net
Wed Aug 6 01:41:11 BST 2003


Yes Thanks very much.

The color scan worked fine at 600 DPI.

Looks great thankyou loads.

Speaking of multiple config files.

There where two sets even after running a removepkg sane-XXXXX the 
system ones where not removed.

But just as a note I moved them to /etc/sane.d.orig and still got the 
errors.

They were in /etc/sane.d at build time though.

Thanx so much. Have a nice night.

Jeff Courtade

Karl Heinz Kremer wrote:

> Isn't it amazing how things just resolve themselves, even when I'm not 
> around :-) Thanks to Henning for
> taking care of this.
>
> The problem you had (no debug output) is usually caused by having more 
> than one Sane installation
> on one system (this can also be a partial installation like leftover 
> configuration files). Do a
> "find / -name epson.conf -print" on your system to see how many 
> configuration files for the EPSON
> backend you can find.
>
> Karl Heinz
>
>
> On Tuesday, August 5, 2003, at 06:17 PM, Jeff Courtade wrote:
>
>> Henning Meier-Geinitz wrote:
>>
>>> Hi,
>>>
>>> On Tue, Aug 05, 2003 at 02:40:22PM -0400, Jeff Courtade wrote:
>>>
>>>> When running this with the official distribution there was no 
>>>> additional output from scanimage -L
>>>> with
>>>> export SANE_DEBUG_EPSON=255  set.
>>>>
>>>
>>> This means the epson backend was not loaded. That doesn't happen with
>>> the standard SANE distribution, so either your dustribution or you
>>> changed something :-)
>>>
>> I built them from sources, I did nothing unusual .... funny ...
>> I searched for other peope with this issue and found nothing so I 
>> figured it was something strange to do with me..
>>
>> Again this is nothing unusual :)
>>
>>>
>>>> I installed the available dev snapshot just now.
>>>>
>>>> After setting up /etc/sane.d/epson.conf
>>>>
>>>> usb /dev/usb/scanner0
>>>>
>>>> now when I set the debug level I get additional output
>>>>
>>>> and it detects my scanner
>>>>
>>>> This is the output from that
>>>>
>>>> Should it be detected as an unknown model?
>>>>
>>>
>>> I don't know. Does scanning work?
>>>
>>> E.g. "scanimage >image.pnm"? scanimage --help for more options.
>>>
>>
>> Hehe I only got a black and white one so far Just ran a color one and 
>> I am transferring the file now to look at it.
>>
>> SANE is just cool.
>>
>> Thanx
>>
>> Jeff
>>
>>> Bye,
>>>  Henning
>>> _______________________________________________
>>> Sane-devel mailing list
>>> Sane-devel at www.mostang.com
>>> http://www.mostang.com/mailman/listinfo/sane-devel
>>>
>>
>>
>> _______________________________________________
>> Sane-devel mailing list
>> Sane-devel at www.mostang.com
>> http://www.mostang.com/mailman/listinfo/sane-devel
>
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel






More information about the sane-devel mailing list