[sane-devel] Re: Question about Microtek scanner 3830

[Karsten Festag]

Hi,

sorry for the late answer, I was lucky having a bit of holidays :-)

The 3830 type is not yet supported as far as I know. The newer microtek 
scanners are mostly very different from the ones supported by the microtek2 
backend. Hopefully some owner of such a scanner will try to write a SANE 
backend in the future.

best regards,

Karsten



On Wednesday 02 July 2003 05:37, Guo, Min wrote:
> Dear sir:
>
> 	Glad to write to you!
>
> 	I encountered a problem when set up my USB Microtek scanner 3830 in linux
> 2.5.73. I found there are CONFIG_USB_MICROTEK in the kernel source ,so I
> built in and run the following command, but when I run scanimage ,it still
> failed. So could you please take a look at the following information and
> tell me whether it is caused by the incorrect driver? Whether sane supports
> the scanner now?
>
> 	Thank you very much!
>
> 	The product info is
>
> 	> [root at mguoserver RedHat]#  cat /proc/bus/usb/devices
>
> 		T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> 		D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
> 		P:  Vendor=05da ProdID=30d4 Rev= 1.00
> 		S:  Product=USB Scanner
> 		C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
> 		I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> 		E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> 		E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> 		E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=3ms
>
> 		./sane-find-scanner  -v
> 		# Note that sane-find-scanner will find any scanner that is connected
> 		# to a SCSI bus and some scanners that are connected to the Universal
> 		# Serial Bus (USB) depending on your OS. It will even find scanners
> 		# that are not supported at all by SANE. It won't find a scanner that
> 		# is connected to a parallel or proprietary port.
>
> 		sane-find-scanner: searching for SCSI scanners:
> 		sane-find-scanner: checking /dev/scanner... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg0... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg1... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg2... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg3... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg4... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg5... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg6... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg7... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg8... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sg9... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sga... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgb... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgc... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgd... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sge... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgf... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgg... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgh... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgi... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgj... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgk... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgl... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgm... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgn... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgo... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/sgp... failed to open (Invalid
> argument)
>
> 		sane-find-scanner: checking /dev/sgq... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgr... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgs... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgt... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgu... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgv... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgw... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgx... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgy... failed to open (Invalid argument)
> 		sane-find-scanner: checking /dev/sgz... failed to open (Invalid argument)
> 		sane-find-scanner: searching for USB scanners:
> 		sane-find-scanner: checking /dev/usb/scanner... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/usb/scanner0... failed to open
> (Invalid argument) sane-find-scanner: checking /dev/usb/scanner1... failed
> to open (Invalid argument) sane-find-scanner: checking /dev/usb/scanner2...
> failed to open (Invalid argument) sane-find-scanner: checking
> /dev/usb/scanner3... failed to open (Invalid argument) sane-find-scanner:
> checking /dev/usb/scanner4... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/usb/scanner5... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/usb/scanner5... failed to open
> (Invalid argument) sane-find-scanner: checking /dev/usb/scanner7... failed
> to open (Invalid argument) sane-find-scanner: checking /dev/usb/scanner8...
> failed to open (Invalid argument) sane-find-scanner: checking
> /dev/usb/scanner9... failed to open (Invalid argument) sane-find-scanner:
> checking /dev/usb/scanner10... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/usb/scanner11... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/usb/scanner12... failed to open
> (Invalid argument) sane-find-scanner: checking /dev/usb/scanner13... failed
> to open (Invalid argument) sane-find-scanner: checking
> /dev/usb/scanner14... failed to open (Invalid argument) sane-find-scanner:
> checking /dev/usb/scanner15... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/usbscanner... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/usbscanner0... failed to open
> (Invalid argument) sane-find-scanner: checking /dev/usbscanner1... failed
> to open (Invalid argument) sane-find-scanner: checking /dev/usbscanner2...
> failed to open (Invalid argument) sane-find-scanner: checking
> /dev/usbscanner3... failed to open (Invalid argument) sane-find-scanner:
> checking /dev/usbscanner4... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/usbscanner5... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/usbscanner6... failed to open
> (Invalid argument) sane-find-scanner: checking /dev/usbscanner7... failed
> to open (Invalid argument) sane-find-scanner: checking /dev/usbscanner8...
> failed to open (Invalid argument) sane-find-scanner: checking
> /dev/usbscanner9... failed to open (Invalid argument) sane-find-scanner:
> checking /dev/usbscanner10... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/usbscanner11... failed to open (Invalid
> argument) sane-find-scanner: checking /dev/usbscanner12... failed to open
> (Invalid argument) sane-find-scanner: checking /dev/usbscanner13... failed
> to open (Invalid argument) sane-find-scanner: checking /dev/usbscanner14...
> failed to open (Invalid argument) sane-find-scanner: checking
> /dev/usbscanner15... failed to open (Invalid argument) sane-find-scanner:
> done
>
>
> Thanks
> Guo Min
> The content of this email message solely contains my own personal views,
> and not those of my employer.