[sane-devel] Trapped in a Box

[Martijn van Oosterhout]

As the other person said, post a link somewhere. Basically you need to
determine the structure of the protocol. Is it writing and writing the same
places again and again. That would indicate registers.

And so forth.

If you post a link, some people with more experience could give some hints.

Hope this helps,

On Sun, Aug 10, 2003 at 10:42:30AM +0200, Alexander Feldman wrote:
> Hi,
> 
> I could not find a backend for my PrimeFilm 1800i, so I decided to write
> one. It seems that I can't get anything about the protocol so I used
> usbsnoop on a windows box to log the protocol. It produced a nice 8 Mb log
> file. Next, lacking any experience with USB I started reading the specs, the
> Linux USB programming manual some other USB backends and more.
> As it is a complete mess in my head now, I would ask here for a hint - what
> to do next - for the last few hours I was trying to manually send some URBs
> using a utility USB-robot, but to no avail.
> 
> Thanks,
> 
> -- Alex
> 
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

-- 
Martijn van Oosterhout   <kleptog at svana.org>   http://svana.org/kleptog/
> "All that is needed for the forces of evil to triumph is for enough good
> men to do nothing." - Edmond Burke
> "The penalty good people pay for not being interested in politics is to be
> governed by people worse than themselves." - Plato
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 232 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20030810/e25a77b2/attachment.sig>