[sane-devel] Epson Perfection 2400 on RH 9
Sun, 14 Dec 2003 17:24:22 -0100
On Sun, 2003-12-14 at 15:11, email@example.com wrote:
> Just got my Epson Perfection 2400 scanner. Attached it to my RH9 box. Installed the latest sane-backends tarball.
> Here is what I see:
> does find the scanner
> But scanimage -L doesnt find it.
> cat /proc/bus/usb/devices does show my scanner.
> lsmod also shows the scanner module loaded. Just to be sure I did a
> rmmod scanner
> modprobe scanner vendor=0x.. product=0x...
> No problem here.
> I uncommented the
> usb /dev/usb/scanner0
> line in /etc/sane.d/epson.conf
> /etc/sane.d/dll.conf does have the epson line uncommented
> If I do a scanimage -d epson:/dev/usb/scanner0 it says 'Cannot open device'.
> Still no luck. What am I missing? Perfection 2400 does seem to be supported by the sane-epson backend.
check man sane-usb
check permission of /dev/usb/scanner0
try using module libusb instead of scanner