[sane-devel] Epson Perfection 2400 on RH 9

gerard klaver gerard at gkall.hobby.nl
Sun Dec 14 18:24:22 GMT 2003


On Sun, 2003-12-14 at 15:11, sane at vikas.mailshell.com wrote:
> Just got my Epson Perfection 2400 scanner. Attached it to my RH9 box. Installed the latest sane-backends tarball.
> 
> Here is what I see:
> 
> sane-find-scanner
> 
> does find the scanner
> 
> But scanimage -L doesnt find it.
> 
> cat /proc/bus/usb/devices does show my scanner.
> 
> lsmod also shows the scanner module loaded. Just to be sure I did a 
> rmmod scanner
> modprobe scanner vendor=0x.. product=0x...
> 
> No problem here.
> 
> I uncommented the
> usb /dev/usb/scanner0
> line in /etc/sane.d/epson.conf
> 
> /etc/sane.d/dll.conf does have the epson line uncommented
> 
> If I do a  scanimage -d epson:/dev/usb/scanner0 it says 'Cannot open device'.
> 
> Still no luck. What am I missing? Perfection 2400 does seem to be supported by the sane-epson backend.
> 
> Help?
> 
> Thanks
check man sane-usb

check permission of /dev/usb/scanner0

try using module libusb instead of scanner

-- 
----------
m.vr.gr.
Gerard Klaver





More information about the sane-devel mailing list