[sane-devel] saned doesn't release the parallel port when finished]

[Jim George]

Hi Henning,

I don't understand what's happening here :(  I checked the connection of
the scanner on the parallel port and then re-did the scanimage with
SANE_DEBUG_MUSTEK_PP=255 (I didn't use SANE_DEBUG_SANEI_PA4S2=255 because
it filled my disk up!).  The result is attached.

What's wierd is that all the file appears to say that it returned the
scanner never released.

Any ideas where I can go with this now?

Thanks,

Jim
> Hi,
>
> On Fri, Dec 26, 2003 at 02:13:49PM -0000, Jim George wrote:
>> appologies for the double post, I've been having problems with my
>> email.
>>
>> The problem has taken a new twist (as you can see from the attached).
>> I'm sure the configuration files are setup correctly as follows;
>>
>> /etc/sane.d/dll.conf
>> net, pnm are uncommented
>>
>> /etc/sane.d/saned.conf
>> localhost is uncommented and /etc/services and /etc/inetd.conf are
>> setup correctly
>>
>> /etc/sane.d/mustek_pp.conf
>> scanner Mustek-1200CP parport0 cis1200
>
> [...]
>
>> [mustek_pp] cis_attach: couldn't attach to `parport0' (Invalid
>> argument) [mustek_pp] sane_open: unknown devicename ``Mustek-1200CP''
>
> This time it's not related to saned. The scanner is just not detected.
> The same should happen if you scan directly without saned.
>
> I think you can get more debug infor with
> "SANE_DEBUG_SANEI_PA4S2=255". But that's really not releated to saned
> and as it worked before, i guess you changed something :-)
>
> Bye,
>   Henning
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org


-------------- next part --------------
A non-text attachment was scrubbed...
Name: jim.gz
Type: application/x-gzip
Size: 10566 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20031226/3ac07447/attachment.bin>