[sane-devel] Artec Viewstation AT3 SCSI scanner

[Till Kamppeter]

Once, do not use printerdrake, as there is a problem with it with some 
scanners. Proceed as shown on

http://www.mandrakeclub.com/modules.php?op=modload&name=Splatt_Forum&file=viewtopic&topic=3641&forum=13

to update SANE to 1.0.9 (if needed) and to manually set up the scanner.

    Till


Anders Drejer wrote:
> I am trying to make my Artec Viewstation AT3 scanner work on my Linux
> Mandrake 9.0. When I try to configure it with ScanDrake it find the
> scanner, but no driver (but there should be one according to the
> manual).
> 
> sane-fins-scanner also finds the scanner (sane-find-scanner: found SCSI
> scanner "ULTIMA AT3     1.60 " at device /dev/sg1).
> 
> Do I have to make some manual configurations or should ScanDrake do the
> work?
>