[sane-devel] Canoscan N1220U + RH 8.0 problem

[Henning Meier-Geinitz]

Hi,

On Wed, Feb 05, 2003 at 03:02:04AM -0800, vraptor@employees.org wrote:
> I am having trouble getting my Canoscan N1220U scanner working
> with a stock RH 8.0 install.
> 
> Here's the installed versions (from rpms):
> 
> xsane-0.84-8

Ok (0.90 is current, but 0.84 will also work).

> sane-backends-1.0.8-5

Too old. Use 1.0.10.

> [plustek] Device >0x04A9-0x2207<, is not supported!
> Obviously, the most significant point there seems to be "[plustek]
> Device >0x04A9-0x2207<, is not supported!"  I double-checked, and
> scanner.h in the local kernel source has this listed...

The kernel scanner driver supports (almost) all scanners. That's not
the problem. The SANE driver must know about your scanner.

> Thanks for any suggestions.  I'm open to removing rpm's and compiling
> from source, but would appreciate comments on what's missing and how
> installing from scratch would fix it.

If there are already sane-backends 1.0.10 RPMs, use them. Otherwise
get the source.

You can check if your version of sane supportes a specific
scanner: http://www.mostang.com/sane/sane-old-backends.html

The list at the front pages alsways is about the latest version.

Bye,
  Henning