Re[2]: [sane-devel] Problem in setting up Xsane
Holger Drefs
SANE Mailing List <sane-devel@mostang.com>
Thu, 27 Feb 2003 13:36:59 +0100
Hello Stephen,
Thursday, February 27, 2003, 11:05:12 AM, you wrote:
SL> Following information obtained from WinME on the same PC
SL> Adapter AVA-1505 SCSI Host Adapter
SL> AGFA EPPSCSI Miniport driver
SL> Interrupt 09
SL> I/O port 0140-015F
>> With this information you should tell RH to load the appropriate driver
>> for that card. It=B4s very likely that Xsane will work afterwards.
SL> How to proceed=3F
As Henning wrote you should load the appropriate driver for the adapter.
As google also would find for you, try this:
http://igloo.its.unimelb.edu.au/Webmail/tips/msg00262.html
You can try first the same settings as they are used in windows (irq 9,
i/o 140h.
Best regards,
Holger