[sane-devel] Hewllet Packard 4300c Scanner

[Till Kamppeter]

You don't need to remove anything as I have already included the NIASH 
support into the Mandrake packages of SANE beginning from version 1.0.9.

DO NOT run scannerdrake. Add a line containing only "niash" to your 
/etc/sanbe.d/dll.conf and you are ready to scan. Simply start the 
scanning program of your choice.

Happy scanning.

    Till


Yago wrote:
> 
> But if I want to remove my SANE packet (is the sane-backends-1.0.9-3.1mdk and 
> sane-frontends-1.0.9-1.1mdk) I need to remove also this software:
> 
> libsane1-1.0.9-3.1mdk
> libsane-devel-1.0.9-3.1mdk
> xsane-0.90-1.1mdk
> xsane-gimp-0.90-1.1mdk
> 
> And the dependencies that suppose remove also:
> 
> kdegraphics-3.0.3-11mdk
> kdegraphics-devel-3.0.3-11mdk
> kdevelop-2.1.3-6mdk
> koffice-1.2-3mdk
> koffice-devel-1.2-3mdk
> koffice-i18n-es-1.2-1mdk
> 
> So I don't know if after to delete all this software I will to use KDE, 
> Koffice and some any other aplications with liasions with that ones.
> 
> I have a Mandrake 9.0 distro with 2.4.19 Kernel version with the USB module 
> charged at init (UHCI) and the sane-find-scanner returns that:
> 
> # No SCSI scanners found. If you expected something different, make sure that
> # you have loaded a SCSI driver for your SCSI adapter.
> found USB scanner (vendor=0x03f0, product=0x0305) at /dev/usb/scanner0
> found USB scanner (vendor=0x03f0, product=0x0305) at /dev/usbscanner
> found USB scanner (vendor=0x03f0, product=0x0305) at /dev/usbscanner0
> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0305 
> [Hewlett-Packard ScanJet 4300C]) at libusb:001:002
> # A USB device was detected. This program can't be sure if it's really
> # a scanner. If it is your scanner, it may or may not be supported by
> # SANE. Try scanimage -L and read the backend's manpage.
> # Scanners connected to the parallel port or other proprietary ports can't be
> # detected by this program.
> 
> I need help and I am new in all that Linux scanner stories . Thanks to all.