[sane-devel] Canoscan N1220U + RH 8.0 problem

[Jaeger, Gerhard]

Hi,

use SANE-1.0.10 and then it should work!!!
The support is not included in versions < 1.0.10...

Gerhard

On Mittwoch, 5. Februar 2003 12:02, vraptor at employees.org wrote:
> I am having trouble getting my Canoscan N1220U scanner working
> with a stock RH 8.0 install.
>
> Here's the installed versions (from rpms):
>
> xsane-0.84-8
> sane-backends-1.0.8-5
> sane-frontends-1.0.8-4
> xsane-gimp-0.84-8
> sane-backends-devel-1.0.8-5
>
> Scanner is showing up when plugged in:
>
> Feb  5 02:43:30 linux-test /etc/hotplug/usb.agent: Setup scanner for USB
> product 4a9/2207/100
>
> And, sane-find-scanner reports it:
> sane-find-scanner: found USB scanner (vendor = 0x04a9, product = 0x2207) at
> device /dev/usb/scanner0
>
> I have modified my /etc/sane.d/dll.conf to only include the plustek
> reference. I have changed my /etc/sane.d/plustek.conf to include:
>
> [usb] 0x4a9 0x2207
> device /dev/usb/scanner0
>
> And I added the following to my /etc/modules.conf (saw this suggested
> in archives for similar problem for a different scanner):
>
> options scanner vendor=0x4a9 product=0x2207
>
> However, xsane refuses to recognize the scanner with "no devices
> available" error dialog.  As found in other trouble-shooting
> threads, I ran scanimage with debugging: