[sane-devel] Problem in setting up Xsane

Henning Meier-Geinitz henning at meier-geinitz.de
Wed Feb 26 13:08:08 GMT 2003


Hi,

On Wed, Feb 26, 2003 at 06:38:59PM +0800, Stephen Liu wrote:
> >Yes but there should be the scanner as well! This is the machine where
> >the scanner is attached or? Have you got /dev/sg0 .. sg7?
> 
> $ su
> Password:
> # locate sg0
> /dev/sg0

Ok. Please tell us more about your system:

- Which SCSI card is used for your scanner?
- Is the SCSI driver for this card loaded?
- Is your SCSI cdrom connected to the same SCSI card or a different one?

Your problem is not related to xsane (that's "just" the graphical
application, the scanner access is done in the SANE backends).
It's a problem of your kernel or hardware. First make sure that your
scanner is detected in /proc/scsi/scsi, then you can go on with
sane-find-scanner, scanimage and xsane.

> >There is a net.conf in C:\sane\etc\sane.d or corresponding path in
> >linux, you should write here the ip-number of the machine where the
> >scanner is attached.
> 
> 
> # locate net.conf
> /etc/sane.d/net.conf

Ignore net.conf. At least if you don't want to use SANE over the
network, you don't need it.

Bye,
  Henning



More information about the sane-devel mailing list