[sane-devel] no device files

Till Kamppeter till.kamppeter@gmx.net
Mon, 27 Jan 2003 13:57:47 +0100


Edit /etc/modules.conf adding the line

options scanner vendor=0x06dc product=0x0014

Then do (as root):

rmmod scanner
modprobe scanner

You wiil find the device then as /dev/usb/scanner0 (NOT in /etc/usb).

    Till


Zeus wrote:
> I just realize that, in my /etc/usb there are no device files?
> How that can't be?
> 
> I have a scanner, it's a non Sane scanner, the usb-view can detected the 
> scanner. I attach the information about my scanner.
> 
> using Mandrake 9.0
> 
> 
> ------------------------------------------------------------------------
> 
> T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> S:  Product=USB UHCI Root Hub
> S:  SerialNumber=d000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=06dc ProdID=0014 Rev= 1.00
> S:  Manufacturer=F.I.T.
> S:  Product=USB Scanner
> S:  SerialNumber=RTS8801C2-006
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=   8 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=250ms
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> S:  Product=USB UHCI Root Hub
> S:  SerialNumber=d400
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms