[sane-devel] no device files
Zeus
zeus_dreamer@myrealbox.com
Tue, 28 Jan 2003 09:34:57 -0800
Till Kamppeter wrote:
> Edit /etc/modules.conf adding the line
>
> options scanner vendor=0x06dc product=0x0014
>
> Then do (as root):
>
> rmmod scanner
> modprobe scanner
>
> You wiil find the device then as /dev/usb/scanner0 (NOT in /etc/usb).
>
> Till
>
>
> Zeus wrote:
>
>> I just realize that, in my /etc/usb there are no device files?
>> How that can't be?
>>
>> I have a scanner, it's a non Sane scanner, the usb-view can detected
>> the scanner. I attach the information about my scanner.
>>
>> using Mandrake 9.0
>>
>>
>> ------------------------------------------------------------------------
>>
>> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
>> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
>> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
>> P: Vendor=0000 ProdID=0000 Rev= 0.00
>> S: Product=USB UHCI Root Hub
>> S: SerialNumber=d000
>> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
>> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
>> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
>> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
>> P: Vendor=06dc ProdID=0014 Rev= 1.00
>> S: Manufacturer=F.I.T.
>> S: Product=USB Scanner
>> S: SerialNumber=RTS8801C2-006
>> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
>> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
>> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
>> E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
>> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
>> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
>> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
>> P: Vendor=0000 ProdID=0000 Rev= 0.00
>> S: Product=USB UHCI Root Hub
>> S: SerialNumber=d400
>> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
>> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
>> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
i have Edit /etc/modules.conf adding the line
options scanner vendor=0x06dc product=0x0014
And than do
rmmod scanner
but error displayed:
rmmod: module scanner is not loaded
what should i do?
Information about my scanner.
It's Prolink Scanner Winscan Pro 2448U
www.fida.com
I allready contact Prolink, and asking is there any chances their
scanner will works on Linux. They said, the will be considering about
it. Iam not a programer, than i cannot do anything more than just wait
for someone make the driver :).
--
zeus;]
================================================================
http://zeus.coolfreepage.com ||personal web page
http://www.bajingloncat.com ||Bajing Loncat Studio
http://www.bajingloncat.com/forum ||Bajing Loncat Forum
================================================================