[sane-devel] microtek x6usb

[Karsten Festag]

Hi,

please give some more details:

what does 
scanimage -L
says?

What Distribution and what SANE version do you use (Mandrake 9.0 is buggy,
check dll.conf for an entry 
microtek2)

Try to link /dev/sg0 to /dev/scanner and check the permissions of /dev/sg0.

Regards,

Karsten

> I am having difficulties getting my scanner to work with sane....
> Same results with microtek:... as with microtek2:....
> 
> =======
> $ sane-find-scanner
> 
> # Note that sane-find-scanner will find any scanner that is connected
> # to a SCSI bus and some scanners that are connected to the Universal
> # Serial Bus (USB) depending on your OS. It will even find scanners
> # that are not supported at all by SANE. It won't find a scanner that
> # is connected to a parallel or proprietary port.
> 
> # You may want to run this program as super-user to find all devices.
> # Once you found the scanner devices, be sure to adjust access
> # permissions as necessary.
> 
> sane-find-scanner: found SCSI scanner " Scanner 636A4 1.40" at device
> /dev/sg0
> 
> $ xsane microtek2:/dev/sg0
> 
> [opens license agreement]
> [fails with: "Failed to open device `mustek2:/dev/sg0': Invalid
> argument."
> 
> =======
> 
> Any help will decrease my need to boot into Windahs. Extra, extra good
> news.
> 
> And I thank you.
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
> 

-- 
+++ GMX - Mail, Messaging & more  http://www.gmx.net +++
NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!