[sane-devel] Normal or destructive behaviour when SANE starts?
Jose Paulo Moitinho de Almeida
moitinho@civil.ist.utl.pt
Fri, 14 Mar 2003 16:36:46 +0000
On Friday 14 March 2003 13:03, Alisdair wrote:
> ..
>
> 1. The scanner spends about 15 seconds making rather worrying grinding
> noises (the scan head does not move at this time);
>
From the PROBLEMS file:
Status: O
- Avoiding damage on Mustek flatbed scanners
Most Mustek flatbed scanners have no protection against exceeding
the physical scan area height. That is, if a scan is attempted with
a height that exceeds the height of the scan surface, the scanner
begins making loud noises and the scan mechanism may be damaged.
Thus, if you hear such a noise, IMMEDIATELY turn off the scanner.
I once had a scanner (neither Mustek nor Agfa) damaged because of this. Don't
know about your case, but I would be most carefull.
Regards
ZP