[sane-devel] Umax/XSane: no scanning when using predefined scan areas an preview window

[Klaus Dahlke]

Oliver,

I did some tests on that:

Start xsane:

scan area	preview		scan
full size		ok		ok
DINA5P		     ok			ok
13x18			ok		freeze (CTRL-C, unplug scanner)

Start xsane
10x15		no preview	ok
13x9		no preview	ok
13x18		no preview	ok
13x18		ok			freeze (CTRL-C, unplug scanner)

Start xsane	
10x15		ok			ok
13x18		no preview		ok
13x18		ok + man. resize	ok
DINA4P		ok			ok
13x18		ok			ok
13x18		ok			ok
18x13		ok			ok

Unfortunately, not a clear picture. The xsane-freeze I have only seen for 13x18 and only if a preview was made with no manual resizing afterwards. I don't have glue how this come.

Best regards,
Klaus

On Sun, 2 Mar 2003 18:59:18 +0100
Oliver Rauch <oliver.rauch at rauch-domain.de> wrote:

> 
> The preselection of a scanarea should not effect anything like this.
> Does this happen for all available scanareas?
> Please select a scanarea by hand after you selected a scanarea in the menu.
> 
> Oliver
> 
> 
> On Saturday 01 March 2003 21:38, Klaus Dahlke wrote:
> > Hi all,
> >
> > I have an Umax Astra 2200 SU linked to the USB port. Xsane version is 0.90,
> > sane-backend is 1.0.11. When sizing the scan area manually scanning is no
> > problem. But when setting the scan area via the selections on the preview
> > window the scanning starts, receives RGB data. The progress bar moves until
> > about 95% and then everything stops. Xsane has to be cancelled and teh
> > scanner to be switched to do a new scan.
> >
> > Any ideas?
> > Cheers,
> > Klaus
> > _______________________________________________
> > Sane-devel mailing list
> > Sane-devel at www.mostang.com
> > http://www.mostang.com/mailman/listinfo/sane-devel
> 
> -- 
> http://www.xsane.org
> http://www.mostang.com/sane
> http://www.rauch-domain.de
> mailto:Oliver.Rauch at Rauch-Domain.DE
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>