[sane-devel] Sane Epson Backend
Pierre SOUCHAY
bad.sheep at free.fr
Wed Mar 5 10:32:25 GMT 2003
Hi,
I've got the same problem, try to specify the device on the command line.
i.e:
xsane epson:/dev/usb/scanner0 or
scanimage -d epson:/dev/usb/scanner0
I notice the problem also occurs when using saned daemon, I have to specify on
the command line :
xsane net:host:epson:/dev/usb/scanner0
I suppose it is due to the USB (it works fine for me with SCSI scanners)
Regards.
Pierre Souchay
Le Mercredi 5 Mars 2003 05:58, Jesus A. Orosco a écrit :
> Greetings All,
>
> I am currently using FreeBSD 4.7 as my os, and recently purchased and
> Epson 1660 USB color scanner. My hope was to purchase a scanner that
> was compatiable with Sane Backends. All the lists that I search for say
> that the backends will work with my scanner. I have run the
> sane-find-scanner utility and it returns the following:
>
> Found USB scanner (vendor=0x04b8, product=0x011e) at
> libusb:/dev/usb0:/dev/ugen0
>
> The next few lines go on to say that a USB device was detected but that
> it cant be sure that its a scanner to try scanimage L. So I do and
> it returns the following:
>
> No scanners were identified. If you were expecting
> something different check that the scanner is plugged
>
> When I pull the USB cable out from the back of the computer it returns
> the following:
>
> ugen0: at uhub0 port 1 (addr 2) disconnected
> ugen0: detached
>
> When I plug the USB cable back in it returns the following:
>
> Ugen0: EPSON EPSON Scanner, rev 2.00/1.00, addr 2
>
> What gives? Any ideas anyone? Please help.
More information about the sane-devel
mailing list