[sane-devel] What am I missing?

[Peter Kirchgessner]

Hi,

try to plug in the USB-cable of the scanner after your system is up. If 
you hear a short beep after a few seconds, the system should have 
recognized the scanner. If not, have a look at /var/log/messages for 
error messages.
Did you unplug the SCSI-connection of the scanner ? This might be 
necessary to get it running with USB.

Sincerely

Peter

David Wilson schrieb:
> Hello,
> 
> I hate to admit defeat, but I have not been able to get my USB HP 6200C
> scanner to show up when I try the sane-find-scanner program.
> cat /proc/bus/usb/devices shows nothing.
> I am running A PCCHIPS 830 motherboard (SIS 735 chipset I believe)
> Redhat 8.0
> Kernel 2.4.21-pre5 with usb-ohci (tried both support compiled into the 
> kernel and as a module)
> I tried using the scanner module installed and removed.
> Sane backend 1.0.11
>      front end 1.0.10
> I also tried the RPMs on RH8.0
> the libraries were added to /etc/ld.so.conf
> ldconfig was run
> 
> Any idea what the next item of destruction is? 
> 
> Thanks,
> 
> Dave


-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net