[sane-devel] Shotcut to detect IRQ

[Stephen Liu]

Hi Henning,

Henning Meier-Geinitz wrote:
>  - snip -
> 
> That's done by your distribution. I guess it's done with PAM. Check
> your distribution's manuals for this keyword.
> 
> I'm pretty sure you can change the setup so everytime you login you
> /dev/sg1 gets the right permissions.

(referring to 
https://www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/ref-guide/s1-pam-config-files.html)

Hereinbelow is the PAM configuration file

# cat /etc/pam.d/login
#%PAM-1.0
auth       required     /lib/security/pam_securetty.so
auth       required     /lib/security/pam_stack.so service=system-auth
auth       required     /lib/security/pam_nologin.so
account    required     /lib/security/pam_stack.so service=system-auth
password   required     /lib/security/pam_stack.so service=system-auth
session    required     /lib/security/pam_stack.so service=system-auth
session    optional     /lib/security/pam_console.so

Shall I delete following 3 lines from the file

auth       required     /lib/security/pam_nologin.so
account    required     /lib/security/pam_stack.so service=system-auth
password   required     /lib/security/pam_stack.so service=system-auth



>>2) Neither modutils directory nor the file 'aliases' exist
> 
> Put the options line in /etc/modules.conf instead. And place "modprobe
> aha152x" somewhere in the boot scrips, e.g. /etc/init.d/boot.local if
> it exists.

Hereinbelow is the content of /etc/modules.conf

# cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 8139too
alias eth1 8139too
alias sound-slot-0 ymfpci
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L 
 >/dev/null 2>&1                  || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S 
 >/dev/null 2>&1 |                 | :
alias usb-controller usb-uhci


Shall I insert "aha152x=0x140,9,7,0" at the bottom?


The file "/etc/init.d/boot.local" does not exist.

B.Regards
Stephen