[sane-devel] ScanJet 3400c

[Kernel]

Hi,
	I am using Suse 8.2 and I have a problem with making my HP 3400c to work. =
I=20
am using sane 1.0.12.0 backend. I tried everything but it won't work. Syste=
m=20
recognized scanner and put niash driver but when I start Kooka, for example=
,=20
it says that I didn't provide SANE installation. Xsane and Xscanimage tell =
me=20
that they cant open the niash:libusb:001:002 device becouse it is busy. I=20
also uncommented the /dev/usbscanner line in niash.conf but that, also, had=
=20
no effect.
	This is output from consol:
________________________________________________________________
kernel@linux:~> sane-find-scanner

  # No SCSI scanners found. If you expected something different, make sure=
=20
that
  # you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=3D0x03f0, product=3D0x0405) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supporte=
d=20
by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Scanners connected to the parallel port or other proprietary ports can'=
t=20
be
  # detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
kernel@linux:~> scanimage -L
device `niash:libusb:001:002' is a Hewlett-Packard ScanJet 3400C flatbed=20
scanner
kernel@linux:~> scanimage -help
Usage: scanimage [OPTION]...

Start image acquisition on a scanner device and write PNM image data to
standard output.

=2Dd, --device-name=3DDEVICE   use a given scanner device (e.g. hp:/dev/sca=
nner)
    --format=3Dpnm|tiff      file format of output file
=2Di, --icc-profile=3DPROFILE  include this ICC profile into TIFF file
=2DL, --list-devices         show available scanner devices
=2Df, --formatted-device-list=3DFORMAT similar to -L, but the FORMAT of the=
 output
                           can be specified: %d (device name), %v (vendor),
                           %m (model), %t (type), and %i (index number)
=2Db, --batch[=3DFORMAT]       working in batch mode, FORMAT is `out%d.pnm'=
 or
                           `out%d.tif' by default depending on --format
    --batch-start=3D#        page number to start naming files with
    --batch-count=3D#        how many pages to scan in batch mode
    --batch-increment=3D#    increase number in filename by an amount of #
    --batch-double         increment page number by two for 2sided originals
                           being scanned in a single sided scanner
    --accept-md5-only      only accept authorization requests using md5
=2Dn, --dont-scan            only set options, don't actually scan
=2DT, --test                 test backend thoroughly
=2Dh, --help                 display this help message and exit
=2Dv, --verbose              give even more status messages
=2DV, --version              print version information
scanimage: open of device niash:libusb:001:002 failed: Device busy
Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.

List of available devices:
    niash:libusb:001:002
kernel@linux:~> scanimage -T
scanimage: open of device niash:libusb:001:002 failed: Device busy
kernel@linux:~> scanimage --help -d niash:libusb:001:002
Usage: scanimage [OPTION]...

Start image acquisition on a scanner device and write PNM image data to
standard output.

=2Dd, --device-name=3DDEVICE   use a given scanner device (e.g. hp:/dev/sca=
nner)
    --format=3Dpnm|tiff      file format of output file
=2Di, --icc-profile=3DPROFILE  include this ICC profile into TIFF file
=2DL, --list-devices         show available scanner devices
=2Df, --formatted-device-list=3DFORMAT similar to -L, but the FORMAT of the=
 output
                           can be specified: %d (device name), %v (vendor),
                           %m (model), %t (type), and %i (index number)
=2Db, --batch[=3DFORMAT]       working in batch mode, FORMAT is `out%d.pnm'=
 or
                           `out%d.tif' by default depending on --format
    --batch-start=3D#        page number to start naming files with
    --batch-count=3D#        how many pages to scan in batch mode
    --batch-increment=3D#    increase number in filename by an amount of #
    --batch-double         increment page number by two for 2sided originals
                           being scanned in a single sided scanner
    --accept-md5-only      only accept authorization requests using md5
=2Dn, --dont-scan            only set options, don't actually scan
=2DT, --test                 test backend thoroughly
=2Dh, --help                 display this help message and exit
=2Dv, --verbose              give even more status messages
=2DV, --version              print version information
scanimage: open of device niash:libusb:001:002 failed: Device busy
Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.

List of available devices:
    niash:libusb:001:002
____________________________________________________________________

	Does anyone have any idea how I could make my scanner work because that is=
=20
the ONLY thing that keeps me atached to M$.

Regards,
		Predrag Mirkovi=C4=87