[sane-devel] epson 1660 scan resolution questions

[Karl Heinz Kremer]

Jerry,

the list of available resolutions gets reported by the scanner. So if  
you
see resolutions up to 3200 dpi, the scanner can actually support all
of them.

Your kernel is relatively old, and the timeout problem is a known  
problem -
even though it's more likely to occur when you can using a transparency
unit.

If you cannot update your kernel, you can modify a timeout value in
the scanner.c source file. Which kernel version are you using exactly?
With this information I may be able to tell you which line to change.

Karl Heinz


On Sunday, November 16, 2003, at 11:24 AM, Jerry Sievers wrote:

> hi.  a few days ago i got an epson 1660 and compiled sane backends
> 1.0.13-pre2.  setup the modules.conf file with vendor and product ID
> info as such;
>
> options scanner vendor=0x04b8 product=0x011e
>
> this is on linux redhat 7.0 w/kernel 2.2.
>
> scanimage --help reports resolutions up to 3200 DPI.
>
> setting anything higher than 600 for mode color or 800 for mode binary
> causes the scanning to hang and an IO error reported by scanner.c.
> eg;
>
> usb_control/bulk_msg: timeout
> scanner.c: read_scanner(0): funky result:-32. Please notify the
> maintainer.
>
> please, wondering what to expect from this scanner and if there's a
> problem with higher resolutions scans or just a bug in the reporting
> of this model's capabilities.
>
> i am legally blind and not able to read the specs from the paperwork
> supplied with the scanner for a better idea of what's supported.
>
> general purpose scanning seems fine.
>
> great job sane developers!
>
>
> --  
> ----------------------------------------------------------------------- 
> --------
> Jerry Sievers   305 854-3001 (home)     Unix Administrator/Consultant
>                 305 321-1144 (mobile	http://www.JerrySievers.com/
>
> -- 
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org