[sane-devel] hp scanjet 3670
Mickael Profeta
mike at alezan.org
Mon Nov 17 10:25:52 GMT 2003
Hi
>>there is also an Elite MT ram chips but I do not take the number, can
>>provide it if it can help.
the number on the EliteMT chipset is:
EliteMT (100MHz)
M1B416256A
DZC1HF2GJ
>
> I don't know of anyone. First you should check if the USB descriptors
> look similar to one of the other HP (or other) scanners. SOme
> information about backend writing is on our homepage.
After forcing the scanner module to recognize the scanner,
I test the hp_scan.c programm in the scanner.txt doc of the kernel, but
with no reponse of the scanner.
then
amble% scanimage -L
device `hp4200:/dev/usb/scanner0' is a Hewlett-Packard HP-4200 flatbed
scanner
but when I try to run xsane:
host/uhci.c: uhci_result_control() failed with status 4c0000
[c13ee0c0] link (013ee062) element (013ef240)
0: [c13ef240] link (013ef270) e0 Stalled NAK CRC/Timeo Length=7
MaxLen=7 DT0 E
ndPt=0 Dev=2, PID=2d(SETUP) (buf=088db9a0)
1: [c13ef270] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0
Dev=2, PID=69(IN) (buf=00000000)
scanner.c: ioctl_scanner: control_msg returned -110
May this means that the driver would be near th hp4200 one? And that I
can use it as a starting point?
The windows .inf file seems to say that the driver is the same than the
one for 2400 series and I see that someone was interested to write a
driver for 2400c. Is there something already done? We may get in touch
to work together...
Bye,
Mike
More information about the sane-devel
mailing list