[sane-devel] Fujitsu M3093GD

Andi McLean andi_mclean at ntlworld.com
Fri Nov 28 13:14:17 GMT 2003


Just for your information.

I got the scanner working in grayscale in duplex by using saned
and my Java Program which uses the Sane Network Protocol.

I am setting up a website to host the work done by me for using
the Sane Network Protocol from Java. Once I have put some documentaion
together and uploded it to the website I will let the list know the
address.

Andi


On Fri, 2003-11-07 at 19:28, Andi McLean wrote:
> Thank you so much, that worked.
> 
> scanimage wouldn't save the 2nd image but it wasn't giving an error when
> setting the window.
> 
> I used 
> scanadf -dfujitsu:/dev/sg2 --duplex both  --mode=lineart 
> and it just worked. 
> 
> 
> Thanks for you time and effort
> 
> Andi
> 
> On Fri, 2003-11-07 at 17:31, m. allan noah wrote:
> > On 7 Nov 2003, Andi McLean wrote:
> > 
> > > On Thu, 2003-11-06 at 08:57, Oliver Schirrmeister wrote:
> > > > Am Mit, 2003-11-05 um 21.40 schrieb m. allan noah:
> > > > > On 5 Nov 2003, Andi McLean wrote:
> > > > > 
> > > > > > Hi,
> > > > > > 
> > > > > > I'm using 
> > > > > > red-hat 8.0 
> > > > > > sane-backends 1.0.12
> > > > > > scanimage 1.0.12
> > > > > > and a M3093GD
> > > > > > 
> > > > > > Scanning the front of the document works perfectly but if I try to scan
> > > > > > the back page I get about 38 rows of blank image. If I try full duplex I
> > > > > > only get the front side. Does any one have any ideas of what causes this
> > > > > > or how to fix it?
> > > > > 
> > > > > try using scanadf instead of scanimage, and see what that does for the 
> > > > > duplex=both situation. for the duplex=back, i am not sure why the image is 
> > > > > truncated. try turning on some debug:
> > > > 
> > > > I'm not shure if the scanner supports back side only. As far as I remember
> > > > the fujitsu windows twain-driver doesn't offer this feature.
> > > > Duplex scan works with that scanner at least with sane-backends 1.08 
> > > > I havn't tried newer versions.
> > > You're right about not being able to scan just the back page. 
> > > I've turned on debug as suggested and there seems to be a problem when
> > > setting up the window.
> > > 
> > > Selected output follows :-
> > > .... truncated
> > > [fujitsu] wait_scanner
> > > [fujitsu] test_unit_ready
> > > [fujitsu] 000: 00 00 00 00 00 00
> > > [fujitsu] <cmd<
> > > [fujitsu] 000: 00 00 00 00 00 00
> > > [fujitsu] sanei_scsi_cmd: returning 0 bytes:
> > > [fujitsu] wait_scanner: ok
> > > [fujitsu] set_window_param
> > > [fujitsu] Window set - front
> > > [fujitsu] 000: 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00 00 00
> > > [fujitsu] 016: 27 d7 00 00 36 cf 00 00 00 02 08 00 00 00 00 00
> > > [fujitsu] 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0
> > > [fujitsu] 048: 20 00 00 00 00 84 00 00 00 00 00 00 00 00 00 00
> > > [fujitsu] Window set - back
> > > [fujitsu] 000: 80 00 01 2c 01 2c 00 00 00 00 00 00 00 00 00 00
> > > [fujitsu] 016: 27 d7 00 00 36 cf 00 00 00 02 08 00 00 00 00 00
> > > [fujitsu] 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0
> > > [fujitsu] 048: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > [fujitsu] <cmd<
> > > [fujitsu] 000: 24 00 00 00 00 00 00 00 88 00 00 00 00 00 00 00
> > > [fujitsu] 016: 00 40 00 00 01 2c 01 2c 00 00 00 00 00 00 00 00
> > > [fujitsu] 032: 00 00 27 d7 00 00 36 cf 00 00 00 02 08 00 00 00
> > > [fujitsu] 048: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > [fujitsu] 064: 00 a0 20 00 00 00 00 84 00 00 00 00 00 00 00 00
> > > [fujitsu] 080: 00 00 80 00 01 2c 01 2c 00 00 00 00 00 00 00 00
> > > [fujitsu] 096: 00 00 27 d7 00 00 36 cf 00 00 00 02 08 00 00 00
> > > [fujitsu] 112: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > [fujitsu] 128: 00 a0 20 00 00 00 00 00 00 00 00 00 00 00 00 00
> > > [fujitsu] 144: 00 00
> > > [fujitsu]       5/38/0: Invalid field in parm list 
> > > [fujitsu] sanei_scsi_cmd: returning 0x00000004
> > > [fujitsu] sanei_scsi_cmd: returning 0 bytes:
> > > [fujitsu] sane_start: ERROR: failed to set window
> > > [fujitsu] freeScanner
> > > [fujitsu] release_unit
> > 
> > you are trying to do an 8bit grayscale, duplex scan. i notice 1 thing now 
> > in the manual for the M3093DG: 'duplex reading supports only 0x01' 
> > (lineart)
> > 
> > try setting --mode=lineart and see if that works. if so, i will update the 
> > backend to prevent you from trying :)
> > 
> > allan
> > 
> > 
> > > 
> > > .... truncated
> > > > 
> > > if you need any more of the debug info just ask.
> > > 
> > > Many thanks for your help 
> > > 
> > > Andi
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > sane-devel mailing list
> > > sane-devel at lists.alioth.debian.org
> > > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > > 
> 
> 
> _______________________________________________
> sane-devel mailing list
> sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel





More information about the sane-devel mailing list