[sane-devel] Configuring Epson GT-8000
Dylan
sane@dylan.me.uk
Sat, 7 Aug 2004 16:28:14 +0100
Hi All,
I'm trying to set up an Epson GT-8000 on SuSE9.1 and have come across a=20
strange behaviour...
The scanner is correctly identified on /dev/sg0 by sane-find-scanner,=20
but that's where it goes screwy. scanimage -L fails to identify any=20
scanners. If I run scanimage again, the scanner is identified and can=20
scan an image, but the error light comes on on the scanner. a further=20
scanimage fails to detect, but the error light goes out. This procedure=20
can be repeated ad nauseam.
Thanks for any help
Dylan
output from failed scanimage -L
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.10 from sane-backends=20
1.0.13
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `epson'
[dll] sane_get_devices
[dll] load: searching backend `epson' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1'
[dll] init: initializing backend `epson'
[sanei_debug] Setting debug level of epson to 255.
[epson] sane_init: sane-backends 1.0.13
[epson] sane_init, ># epson.conf<
[epson] sane_init, >#<
[epson] sane_init, ># here are some examples for how to configure the=20
EPSON backend<
[epson] sane_init, >#<
[epson] sane_init, ># SCSI scanner:<
[epson] sane_init, >scsi EPSON<
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_find_devices: vendor=3DEPSON model=3D(null)=20
type=3D(null)
bus=3D0 chan=3D0 id=3D4 lun=3D0 num=3D0
[sanei_scsi] lx_chk_id: 0,0 0,0 4,4 0,0
[sanei_scsi] lx_chk_devicename: matched device(direct): /dev/sg0
[epson] attach_one(/dev/sg0)
[epson] SANE Epson Backend v0.2.40 - 2003-10-27
[epson] attach(/dev/sg0, 1)
[epson] attach: opening /dev/sg0
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_find_devices: vendor=3D(null) model=3D(null)=20
type=3DProcessor
bus=3D0 chan=3D0 id=3D4 lun=3D0 num=3D0
[sanei_scsi] lx_chk_id: 0,0 0,0 4,4 0,0
[sanei_scsi] lx_chk_devicename: matched device(direct): /dev/sg0
[sanei_scsi] get_max_buffer_size for /dev/sg0: 131072
[sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=3D131072 bytes
[sanei_scsi] sanei_scsi_open: SG driver version: 30530
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run=20
time
[sanei_scsi] sanei_scsi_open: using new SG header structure
[epson] attach: sending INQUIRY
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D0 blen=3D36 dur=3D2ms sgat=3D0 op=3D0x12
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D0 blen=3D36 dur=3D2ms sgat=3D0 op=3D0x12
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] >EPSON SCANNER GT-8000 1.32<
[epson] reset()
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 40 @
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D1 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D1 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D2 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D2 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 06 .
[epson] get_identity_information()
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 49 I
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> act: id=3D3 blen=3D2 t_o/elap=3D120000/32ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D3 blen=3D2 dur=3D209ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00=20
00
[sanei_scsi] target status: 00 host status: 0004 driver status: 0000
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 49 I
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> act: id=3D4 blen=3D2 t_o/elap=3D120000/34ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D4 blen=3D2 dur=3D75ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00=20
00
[sanei_scsi] target status: 00 host status: 0004 driver status: 0000
[epson] ident failed
[epson] sane_init, >#<
[epson] sane_init, ># Parallel port scanner:<
[epson] sane_init, >#pio 0x278<
[epson] sane_init, >#pio 0x378<
[epson] sane_init, >#pio 0x3BC<
[epson] sane_init, >#<
[epson] sane_init, ># USB scanner - only enable this if you have an=20
EPSON scanner. It could<
[epson] sane_init, ># otherwise block your non-EPSON=20
scanner from being<
[epson] sane_init, ># recognized.<
[epson] sane_init, ># Depending on your distribution, you may need=20
either the<
[epson] sane_init, ># first or the second entry.<
[epson] sane_init, >usb<
[epson] attach_one_usb()
[epson] SANE Epson Backend v0.2.40 - 2003-10-27
[epson] attach(, 3)
[epson] attach: opening=20
[dll] init: backend `epson' is version 1.0.240
[epson] sane_get_devices()
[dll] sane_get_devices: found 0 devices
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `epson's exit function
[dll] sane_exit: finished
output from successful scanimage -L
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.10 from sane-backends=20
1.0.13
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `epson'
[dll] sane_get_devices
[dll] load: searching backend `epson' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1'
[dll] init: initializing backend `epson'
[sanei_debug] Setting debug level of epson to 255.
[epson] sane_init: sane-backends 1.0.13
[epson] sane_init, ># epson.conf<
[epson] sane_init, >#<
[epson] sane_init, ># here are some examples for how to configure the=20
EPSON backend<
[epson] sane_init, >#<
[epson] sane_init, ># SCSI scanner:<
[epson] sane_init, >scsi EPSON<
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_find_devices: vendor=3DEPSON model=3D(null)=20
type=3D(null)
bus=3D0 chan=3D0 id=3D4 lun=3D0 num=3D0
[sanei_scsi] lx_chk_id: 0,0 0,0 4,4 0,0
[sanei_scsi] lx_chk_devicename: matched device(direct): /dev/sg0
[epson] attach_one(/dev/sg0)
[epson] SANE Epson Backend v0.2.40 - 2003-10-27
[epson] attach(/dev/sg0, 1)
[epson] attach: opening /dev/sg0
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_find_devices: vendor=3D(null) model=3D(null)=20
type=3DProcessor
bus=3D0 chan=3D0 id=3D4 lun=3D0 num=3D0
[sanei_scsi] lx_chk_id: 0,0 0,0 4,4 0,0
[sanei_scsi] lx_chk_devicename: matched device(direct): /dev/sg0
[sanei_scsi] get_max_buffer_size for /dev/sg0: 131072
[sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=3D131072 bytes
[sanei_scsi] sanei_scsi_open: SG driver version: 30530
[sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run=20
time
[sanei_scsi] sanei_scsi_open: using new SG header structure
[epson] attach: sending INQUIRY
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D0 blen=3D36 dur=3D2ms sgat=3D0 op=3D0x12
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D0 blen=3D36 dur=3D2ms sgat=3D0 op=3D0x12
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] >EPSON SCANNER GT-8000 1.32<
[epson] reset()
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 40 @
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D1 blen=3D2 dur=3D3ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D1 blen=3D2 dur=3D3ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 70 00 06 00 00 00 00 00 00 00 00 00 00 00 00=20
00
[sanei_scsi] target status: 02 host status: 0000 driver status: 0008
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D2 blen=3D1 dur=3D3ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D2 blen=3D1 dur=3D3ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success
[sanei_scsi] sense buffer: 70 00 05 00 00 00 00 00 00 00 00 00 00 00 00=20
00
[sanei_scsi] target status: 02 host status: 0000 driver status: 0008
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 1b .
[epson] get_identity_information()
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 49 I
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D3 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D3 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D4 blen=3D4 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D4 blen=3D4 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 4, got =3D 4
[epson] buf[0] 02 .
[epson] buf[1] 00 .
[epson] buf[2] 4f O
[epson] buf[3] 00 .
[epson] code 02
[epson] status 00
[epson] count 79
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D5 blen=3D79 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D5 blen=3D79 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 79, got =3D 79
[epson] buf[0] 42 B
[epson] buf[1] 34 4
[epson] buf[2] 52 R
[epson] buf[3] 32 2
[epson] buf[4] 00 .
[epson] buf[5] 52 R
[epson] buf[6] 3c <
[epson] buf[7] 00 .
[epson] buf[8] 52 R
[epson] buf[9] 48 H
[epson] buf[10] 00 .
[epson] buf[11] 52 R
[epson] buf[12] 4b K
[epson] buf[13] 00 .
[epson] buf[14] 52 R
[epson] buf[15] 50 P
[epson] buf[16] 00 .
[epson] buf[17] 52 R
[epson] buf[18] 5a Z
[epson] buf[19] 00 .
[epson] buf[20] 52 R
[epson] buf[21] 64 d
[epson] buf[22] 00 .
[epson] buf[23] 52 R
[epson] buf[24] 78 x
[epson] buf[25] 00 .
[epson] buf[26] 52 R
[epson] buf[27] 85 .
[epson] buf[28] 00 .
[epson] buf[29] 52 R
[epson] buf[30] 90 .
[epson] buf[31] 00 .
[epson] buf[32] 52 R
[epson] buf[33] 96 .
[epson] buf[34] 00 .
[epson] buf[35] 52 R
[epson] buf[36] a0 .
[epson] buf[37] 00 .
[epson] buf[38] 52 R
[epson] buf[39] af .
[epson] buf[40] 00 .
[epson] buf[41] 52 R
[epson] buf[42] b4 .
[epson] buf[43] 00 .
[epson] buf[44] 52 R
[epson] buf[45] c8 .
[epson] buf[46] 00 .
[epson] buf[47] 52 R
[epson] buf[48] d8 .
[epson] buf[49] 00 .
[epson] buf[50] 52 R
[epson] buf[51] f0 .
[epson] buf[52] 00 .
[epson] buf[53] 52 R
[epson] buf[54] 2c ,
[epson] buf[55] 01 .
[epson] buf[56] 52 R
[epson] buf[57] 40 @
[epson] buf[58] 01 .
[epson] buf[59] 52 R
[epson] buf[60] 68 h
[epson] buf[61] 01 .
[epson] buf[62] 52 R
[epson] buf[63] 90 .
[epson] buf[64] 01 .
[epson] buf[65] 52 R
[epson] buf[66] e0 .
[epson] buf[67] 01 .
[epson] buf[68] 52 R
[epson] buf[69] 58 X
[epson] buf[70] 02 .
[epson] buf[71] 52 R
[epson] buf[72] 20 =20
[epson] buf[73] 03 .
[epson] buf[74] 41 A
[epson] buf[75] 90 .
[epson] buf[76] 1a .
[epson] buf[77] 90 .
[epson] buf[78] 24 $
[epson] type B 0x42
[epson] level 4 0x34
[epson] no option equipment installed
[epson] resolution (dpi): 50
[epson] resolution (dpi): 60
[epson] resolution (dpi): 72
[epson] resolution (dpi): 75
[epson] resolution (dpi): 80
[epson] resolution (dpi): 90
[epson] resolution (dpi): 100
[epson] resolution (dpi): 120
[epson] resolution (dpi): 133
[epson] resolution (dpi): 144
[epson] resolution (dpi): 150
[epson] resolution (dpi): 160
[epson] resolution (dpi): 175
[epson] resolution (dpi): 180
[epson] resolution (dpi): 200
[epson] resolution (dpi): 216
[epson] resolution (dpi): 240
[epson] resolution (dpi): 300
[epson] resolution (dpi): 320
[epson] resolution (dpi): 360
[epson] resolution (dpi): 400
[epson] resolution (dpi): 480
[epson] resolution (dpi): 600
[epson] resolution (dpi): 800
[epson] maximum scan area: x 6800 y 9360
[epson] fbf tlx 0.000000 tly 0.000000 brx 215.899994 bry 297.179993 [mm]
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 44 D
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D6 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D6 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D7 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D7 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 06 .
[epson] send buf, size =3D 1
[epson] buf[0] 10 .
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D8 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D8 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D9 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D9 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 15 .
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 44 D
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D10 blen=3D2 dur=3D1ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D10 blen=3D2 dur=3D1ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D11 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D11 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 06 .
[epson] send buf, size =3D 1
[epson] buf[0] 0e .
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D12 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D12 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D13 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D13 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 15 .
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 44 D
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D14 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D14 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D15 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D15 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 06 .
[epson] send buf, size =3D 1
[epson] buf[0] 0c .
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D16 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D16 blen=3D1 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D17 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D17 blen=3D1 dur=3D1ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 1, got =3D 1
[epson] buf[0] 15 .
[epson] Max. supported color depth =3D 8
[epson] request_focus_position()
[epson] Disabling 'Set Focus' support
[epson] send buf, size =3D 2
[epson] buf[0] 1b .
[epson] buf[1] 66 f
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D18 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D18 blen=3D2 dur=3D2ms sgat=3D0 op=3D0x0a
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D19 blen=3D4 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D19 blen=3D4 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 4, got =3D 4
[epson] buf[0] 02 .
[epson] buf[1] 00 .
[epson] buf[2] 21 !
[epson] buf[3] 00 .
[epson] code 02
[epson] status 00
[epson] count 33
[sanei_scsi] scsi_req_enter: entered 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D20 blen=3D33 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x40262008
[sanei_scsi] sanei_scsi.issue: 0x40262008
dev_max(currently)=3D6 max_active_device=3D1 (origin 1)
def_reserved_size=3D32768
>>> device=3Dsg0 scsi0 chan=3D0 id=3D4 lun=3D0 em=3D0 sg_tablesize=3D50 =
excl=3D1
FD(1): timeout=3D120000ms bufflen=3D131072 (res)sgat=3D4 low_dma=3D0
cmd_q=3D1 f_packid=3D0 k_orphan=3D0 closed=3D0
rb>> rcv: id=3D20 blen=3D33 dur=3D2ms sgat=3D0 op=3D0x08
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[epson] receive buf, expected =3D 33, got =3D 33
[epson] buf[0] 00 .
[epson] buf[1] 00 .
[epson] buf[2] 00 .
[epson] buf[3] 00 .
[epson] buf[4] 00 .
[epson] buf[5] 00 .
[epson] buf[6] 00 .
[epson] buf[7] 00 .
[epson] buf[8] 00 .
[epson] buf[9] 00 .
[epson] buf[10] 00 .
[epson] buf[11] 00 .
[epson] buf[12] 00 .
[epson] buf[13] 00 .
[epson] buf[14] 00 .
[epson] buf[15] 00 .
[epson] buf[16] 00 .
[epson] buf[17] 00 .
[epson] buf[18] 00 .
[epson] buf[19] 00 .
[epson] buf[20] 00 .
[epson] buf[21] 00 .
[epson] buf[22] 00 .
[epson] buf[23] 00 .
[epson] buf[24] 00 .
[epson] buf[25] 00 .
[epson] buf[26] 00 .
[epson] buf[27] 00 .
[epson] buf[28] 00 .
[epson] buf[29] 00 .
[epson] buf[30] 00 .
[epson] buf[31] 00 .
[epson] buf[32] 00 .
[epson] scanner model:=20
[epson] close_scanner(fd =3D 8)
[epson] sane_init, >#<
[epson] sane_init, ># Parallel port scanner:<
[epson] sane_init, >#pio 0x278<
[epson] sane_init, >#pio 0x378<
[epson] sane_init, >#pio 0x3BC<
[epson] sane_init, >#<
[epson] sane_init, ># USB scanner - only enable this if you have an=20
EPSON scanner. It could<
[epson] sane_init, ># otherwise block your non-EPSON=20
scanner from being<
[epson] sane_init, ># recognized.<
[epson] sane_init, ># Depending on your distribution, you may need=20
either the<
[epson] sane_init, ># first or the second entry.<
[epson] sane_init, >usb<
[epson] attach_one_usb()
[epson] SANE Epson Backend v0.2.40 - 2003-10-27
[epson] attach(, 3)
[epson] attach: opening=20
[dll] init: backend `epson' is version 1.0.240
[epson] sane_get_devices()
[dll] sane_get_devices: found 1 devices
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `epson's exit function
[dll] sane_exit: finished
=2D-=20
"I see your Schwartz is as big as mine"=20
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=
=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -Dark Helmet