[sane-devel] Problem with Epson Perfection 2480 Photo

[Jean-Christophe VIALLET]

Thanks for your answer, I've upgraded to 1.0.15 (built from a Mandrake=20
source RPM)

Now I get the new followings outputs while plugging my scanner :

/etc/hotplug/usb.agent: Setup libusbscanner for USB product 4b8/121/110
/etc/hotplug/usb.agent: Module setup libusbscanner for USB product=20
4b8/121/110

My epson.conf file contains a single line
usb

and my snapscan.conf file :
firmware /mnt/win/windows/system/esfw41.bin
/dev/usb/scanner0 bus=3Dusb
# Epson Perfection
usb 0x04b8 0x0121

I've create the device file scanner0 under /dev/usb using the following,=20
even if I'm not sure it's necessary.
mknod /dev/usb/scanner0 c 180 48
chmod a+rw  /dev/usb/scanner0
chmod 666  /dev/usb/scanner0

But it stills doesn't work when I run xsane (I try with no parameters).

I really have no idea of what could be the problem.





Julien BLACHE a =E9crit :
> Jean-Christophe VIALLET <j.viallet@free.fr> wrote:
>=20
>=20
>>I've been searching a lot on the net but I did not find how to make it =
work.
>>
>>I'm using libsane1-1.0.14, sane-backends-1.0.14, xsane-0.93 from a
>>Mandrake box with a 2.4.22 kernel.
>=20
>=20
> Upgrade to 1.0.15.
>=20
> JB.
>=20