[sane-devel] Problem with Epson Perfection 2480 Photo

[Jean-Christophe VIALLET]

Hi,

I've updated my config files and verified the firmware path (in fact, I=20
had already copied it from the command line).

The scanner seems to be recognized since I got something with=20
sane-find-scanner but I get the following error message with xsane :
"Failed to open device 'snapscan:libusb:002:008' : Access to ressource=20
has been denied".

Then the scanner is disconnected and if I run xsane again, I got "no=20
devices available'.

I've tried with user root (even if it is heavily unadvised) and I got=20
the same messages.

Very strange !

Julien BLACHE a =E9crit :
> Jean-Christophe VIALLET <j.viallet@free.fr> wrote:
>=20
>=20
>>My epson.conf file contains a single line
>>usb
>=20
>=20
> The epson backend isn't used for this scanner.
>=20
>=20
>>and my snapscan.conf file :
>>firmware /mnt/win/windows/system/esfw41.bin
>>/dev/usb/scanner0 bus=3Dusb
>=20
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^
>=20
> Remove this line, it's not needed.
>=20
>=20
>># Epson Perfection
>>usb 0x04b8 0x0121
>=20
>=20
> Also, check that the firmware file is found ; depending on the
> filesystem you use for windows, it could be case sensitive or not.
>=20
> JB.
>=20