[sane-devel] How to avoid hpusbscsi for HP 7450C
Rene Rebe
rene@rocklinux-consulting.de
Fri, 20 Feb 2004 11:30:24 +0100 (CET)
Hi,
On: Mon, 02 Feb 2004 12:03:18 -0800,
Thomas Frayne <tomf@sjpc.org> wrote:
> I have an HP 7450C scanner connected via USB 2.0, Fedora Core 1, and =
am
> installing sane-backends-0.1.13. man sane-avision says that it is
> obsolete to access the HP 7450C via hpusbscsi. sane-find-scanner fou=
nd
> SCSI scanner "hp scanjet 7400c 0.8S" at /dev/scanner, /dev/sg5, and
> /dev/sgf. It found USB scanner (vendor=3D0x03f0 [hp], product=3D0x08=
01 [hp
> scanjet 7400c]) at libusb:001:003
> scanimage -L returned device `avision:/dev/sg5' is a Hewlett-Packard
> ScanJet 7400c flatbed scanner. How can I make sure the scanner will =
not
> be accessed via the SCSI emulation? =
rmmod hpuscsi (or remove the module - configure the hotplug system to
not load it ...) and set correct persmissions for
/proc/bus/usb/x/y. x/y depends on the id your scanner got in your
system.
Sincerely yours,
Ren=E9 Rebe
- ROCK Linux stable release maintainer
-- =
Ren=E9 Rebe - Europe/Germany/Berlin
rene@rocklinux.org rene@rocklinux-consulting.de
http://www.rocklinux.org http://www.rocklinux-consulting.de
http://gsmp.tfh-berlin.de/gsmp http://gsmp.tfh-berlin.de/rene