[sane-devel] Microtek ScanMaker E6 and MacOS X doesnt work
Stefan Roper
roeper@softwork-edv.de
Fri, 27 Feb 2004 14:37:38 +0100
This is a multi-part message in MIME format.
------=_NextPart_000_002F_01C3FD3F.3F3CC4E0
Content-Type: text/plain;
charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Hi,
i tried the lastest ( Version 1.0.13) sane binary packages on my Mac G4 with
an Adaptec 2906 Scsi card and the Microtek ScanMaker E6.
The suggested test scan with the command:
$ scanimage -d test:0 > test.pnm
works.
The command:
$ sane-find-scanner
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a SCSI driver for your SCSI adapter.
# No USB scanners found. If you expected something different, make sure that
# you have loaded a driver for your USB host controller and have installed a
# kernel scanner module.
# Scanners connected to the parallel port or other proprietary ports can't
be
# detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
doesn't find anything, which may be ok because the Mac has no /dev/scanner
device.
So i tried the next command:
$ scanimage -L
device `microtek:iokitscsi@<015909000000000f0137c50b>' is a Microtek
ScanMaker E6 flatbed scanner
device `microtek:iokitscsi@<01590b000000000e2c5655a3>' is a Microtek
ScanMaker E6 flatbed scanner
device `microtek:iokitscsi@<015893000000000e2bc9b882>' is a Microtek
ScanMaker E6 flatbed scanner
device `microtek:iokitscsi@<015895000000000e2b39b540>' is a Microtek
ScanMaker E6 flatbed scanner
device `microtek:iokitscsi@<01589d000000000e2aa2e3dc>' is a Microtek
ScanMaker E6 flatbed scanner
device `microtek:iokitscsi@<01589f000000000e2a0de2fe>' is a Microtek
ScanMaker E6 flatbed scanner
device `microtek:iokitscsi@<015837000000000e2984a549>' is a Microtek
ScanMaker E6 flatbed scanner
device `microtek:iokitscsi@<015839000000000e28f1ee11>' is a Microtek
ScanMaker E6 flatbed scanner
Looks like there is a scanner detected, but why 8 times ?
An scanimage > test.pnm doesn't work, the scanner starts, but then the
process hangs. After killing the process, the mac sometimes hangs.
Any suggestions for me ?
Thanks in advance,
Stefan
____________
Virus checked by G DATA AntiVirusKit
Version: AVK 14.0.393 from 20.02.2004
Virus news: www.antiviruslab.com
------=_NextPart_000_002F_01C3FD3F.3F3CC4E0
Content-Type: text/html;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<META content=3D"MSHTML 6.00.2800.1276" name=3DGENERATOR></HEAD>
<BODY>
<DIV>Hi,<BR><BR>i tried the lastest ( Version 1.0.<SPAN=20
class=3D070273613-27022004>1</SPAN>3) sane binary packages on my Mac G4 =
with an=20
Adaptec 2906 Scsi card and the Microtek ScanMaker E6. <BR><BR>The =
suggested test=20
scan with the command:<BR>$=20
<?fontfamily><?param Courier><?x-tad-bigger>scanimage -d test:0 > =
test.pnm<?/x-tad-bigger><?/fontfamily><?fontfamily><?param =
Times><?bigger><?bigger>=20
<BR>works.<BR><?/bigger><?/bigger><?/fontfamily><BR>The command:<BR>$=20
sane-find-scanner <BR><BR># No SCSI scanners found. If you expected =
something=20
different, make sure that<BR># you have loaded a SCSI driver for your =
SCSI=20
adapter.<BR><BR># No USB scanners found. If you expected something =
different,=20
make sure that<BR># you have loaded a driver for your USB host =
controller and=20
have installed a<BR># kernel scanner module.<BR><BR># Scanners connected =
to the=20
parallel port or other proprietary ports can't be<BR># detected by this=20
program.<BR><BR># You may want to run this program as root to find all =
devices.=20
Once you<BR># found the scanner devices, be sure to adjust access =
permissions=20
as<BR># necessary.</DIV>
<DIV><BR>doesn't find anything, which may be ok <SPAN=20
class=3D070273613-27022004>because</SPAN> the <SPAN=20
class=3D070273613-27022004>M</SPAN>ac has no /dev/scanner =
device.<BR><BR>So i=20
tried the next command:<BR>$ scanimage -L<BR>device=20
`microtek:iokitscsi@<015909000000000f0137c50b>' is a Microtek =
ScanMaker E6=20
flatbed scanner<BR>device =
`microtek:iokitscsi@<01590b000000000e2c5655a3>'=20
is a Microtek ScanMaker E6 flatbed scanner<BR>device=20
`microtek:iokitscsi@<015893000000000e2bc9b882>' is a Microtek =
ScanMaker E6=20
flatbed scanner<BR>device =
`microtek:iokitscsi@<015895000000000e2b39b540>'=20
is a Microtek ScanMaker E6 flatbed scanner<BR>device=20
`microtek:iokitscsi@<01589d000000000e2aa2e3dc>' is a Microtek =
ScanMaker E6=20
flatbed scanner<BR>device =
`microtek:iokitscsi@<01589f000000000e2a0de2fe>'=20
is a Microtek ScanMaker E6 flatbed scanner<BR>device=20
`microtek:iokitscsi@<015837000000000e2984a549>' is a Microtek =
ScanMaker E6=20
flatbed scanner<BR>device =
`microtek:iokitscsi@<015839000000000e28f1ee11>'=20
is a Microtek ScanMaker E6 flatbed scanner<BR><BR>Looks like there is a =
scanner=20
detected, but why 8 times ?<BR><BR>An scanimage > test.pnm doesn't =
work, the=20
scanner starts, but then the process hangs. After killing the process, =
the mac=20
sometimes hangs.<BR><BR>Any suggestions for me ?<BR><BR>Thanks in=20
advance,<BR>Stefan</DIV></BODY></HTML>
------=_NextPart_000_002F_01C3FD3F.3F3CC4E0--