[sane-devel] Re: scanner not recognised part II

[Paul Frisson]

I suppose it must be a software/configuration problem since, as I said, it=
=20
worked in RH9.

Cabling supposed to be OK, the scanner works under windows (I have a dual=20
boot). The adapter is an adaptec AHA-2920, must be supported according to t=
he=20
linux documentation.

So, here comes my 'stupid' question : how does one configure the SCSI=20
controller ?

Le Dimanche 29 F=E9vrier 2004 21:11, Karl Heinz Kremer a =E9crit :
> The CD-R shows up as SCSI device because the CD burning software can
> only
> work with SCSI devices. You are using the ide2scsi pseudo SCSI adapter
> for
> this. As you can see, it does not see the scanner. THis means that it's
> not
> a Sane problem, but a problem with the SCSI system (cabling, driver,
> adapter,
> termination...). Did you configure your SCSI controller?